Share on (60497647706):

Fiber Cement Board is a stable performance and light weight building & decoration board used cement as major and natural fiber reinforced, with the process of pulping, emulsion, forming, pressing,autoclaving,drying and surface treatment.With the sanding surface, thickness uniformity is better and grain is clearer.And because of the cement,the strength is higher, and waterproof performance is much better.
Sizes of Cement Board
Thickness | Length x Width (mm) | Surface | Edge |
5mm | 2400x1200mm 2440x1220mm 3000x1200mm 3000x1220mm Cut as the requirement | Single, double surface sanding | Square edge Tapered edge |
6mm | |||
8mm | |||
9mm | |||
10mm | |||
12mm | |||
14-30mm |
Main Parameters
Fire-proof Rate | A-class incombustible |
Incombustibility(min) | 240 minutes |
Density | 1.2-1.5g/cm3 |
Water content ratio | ≤30% |
Swelling ratio | ≤0.40% |
Anti-bending strength | ≤16MPa |
Frost resistance | Do not appear cracking and delamination after 25 cycles of freezing and thawing |
Radioactivity | standard of GB6566-2001(A-class Decoration Materials) |
Wood Grain Cement Siding Panel
1. Light weight, structural earthquake-resistant
2.Heat insulation
3.Fire-proof for 4 hours, Class-A1 incombustibility
4.High strength, anti-bending strength more than 12MPa.
5.Well decoration effect, comfortable living function
6.Green, environmental material
7.Fast and simple construction, high efficiency, lower cost.
Sizes of Cement Siding Panel
Thickness | Width | Length |
6-12mm | 150, 200, 1200 mm | 2400, 3000 mm |
Main Parameters:
Water content | ≤10% |
Water absorption(plain) | ≤30% |
Swelling rate | ≤0.25% |
Thermal shrinkage | ≤0.5% |
Anti-bending strength | ≤12MPa |
Water tightness | The reverse side allows showing water mark but not dropping after 24hours |
Freezing resistance | it doesn't show break and layer after 25 timers freeze thawing |
Impact resistance | without continuous crack after one shock |
Incombustibility | Class - A1 |




Fiber Cement Board is the perfect choice for building board applications such as wall cladding, wall
partitioning and decorative walling. The types of buildings that are sutable for cement board application
are residential, commercial, industrual buildings as well as schools and hospitals,especially where speedy
construction, cleanliness hygiene is of high importance.

Exterior Wall
Exterior decoration panel ...... Surface flat and smooth
Integrative facade panel for exterior wall thermal insulation ......Can meet higher requirement for coating
Interior Wall Decoration Panel ......Easy for different surface processing, like UV, Polyester, Inorganic,Marbling etc.
Flooring
Loft ......High strength and toughness
Loft interlayer, Container house, Light steel villa
Other Application
Subway, Tunnel, Baseboard, Outdoor furniture ......High strength and toughness, large size,smooth surface,and easy for surface treating
Thinner lining board for Stone ......Smooth surface and high strength

Fiber cement siding most often consists of overlapping horizontal boards, imitating wooden siding,clapboard and imitation shingles. Fiber cement siding is also manufactured in a sheet form and is used not only as cladding but is also commonly used as a soffit / eave lining and as a tile underlay on decks and in bathrooms. Fiber cement siding is not only used as an exterior siding, it can also be utilized as a substitute for timber fascias and bargeboards in high fire areas.

v More products you may interest
For Building Materials

New products from manufacturers at wholesale prices