supply liquid silicone rubber factory food grade silicone rubber material cake mold silicone rubber

Product Overview

Description

supply liquid silicone rubber factory food grade silicone rubber material cake mold silicone rubber 

 

Parameter:

 

NO.	HL-8715
Appearance	Translucence
Viscosity  Pa.S	7000-18000
Density g/cm3	1.1
Hardness (shore A°)	15
High temperature resistance	-60+350
Elongation %	500-600%
Tensile-strength KN/m	10-30KN/m
Condition of cure	A/B component according to 1:1 proportion weight after mixing, 150 mm * 150 mm * 2 mm, and 150 ℃ for 7 minutes.

 

 

 

Introduction to products:  

supply liquid silicone rubber factory is a silicone molding material, suitable for injection molding process of a two-component, high transparent, high strength and high tear liquid silicone rubber. A two-component is composed of two components A and B agent, is A kind of liquid flow, no matter what color, in fact the quality is constant temperature curing and heat curing.

 

 

Storage: 

supply liquid silicone rubber factoryshould be kept sealed in ventilation, cool, dry place, away from the children's place, prevent sun direct illuminate, does not belong to dangerous goods, according to the transport of dangerous goods.

 

 

Product use:

supply liquid silicone rubber factory used for high grade product, cake mold, sugar art mold special silicon, candy, chocolate, cake model, etc.

 

 

Characteristic:

1. Have good liquidity, high temperature resistance, corrosion resistance, and high tensile and tear strength, small shrinkage rate, higher rolling over time.

2.Low shrinkage rate, not emit low molecular crosslinking process, so the volume, shrinkage rate is less than 0.1%.

3.Without being limited by the product thickness, depth of curing.

4.This product has excellent resistance extreme temperature -60 to 350 Celsius.

 

5.Food grade, cured silicone can safety touch with skin and foods.

 

6.Liquidity is good, easy perfusion; Can room temperature curing and heat curing, easy to operate.

 

 

 

Operation guides and precautions:

 

1.A, B two weight 1:1 mixing, after vacuum deaeration water. At room temperature (28 degrees) 30 minutes of operation time, 4-5 hours curing completely; Heat up 60-120 degrees, can be completely cured at dozens of minutes.

 

2.And used while operating separate containers, condensation type silicone with unused room temperature silicone tool operation the silica gel.

 

Note:

supply liquid silicone rubber factory viscosity, operating time, after curing, hardness and color can be adjusted with the customer requirements.

 

 

After service:

Our company provide mold technology, If there is any quality problem return, within three months

 

If you have any question about supply liquid silicone rubber factory ,pls feel free contact us.

 

 

Sunny Guo
Dongugan hong lian organic silicon technology co.,ltd.
Tel/Fax:+86769 85075949-816
Mob:+86 18680616828 (wechat/whatsapp)
Skype:sunnyguo3972
Email:silicone(at)hongfengdg.cn
Web:www.hlsilicone.com
Store:hlglue.en.alibaba.com