2.8mm Tungsten Carbide Rod By Carbide Rods Factory
US $2.15-$2.40
K20 K30 diameter D18mm *330mm high quality tungsten carbide rods for making carbide end mills, drill bits, screw tap
- Category: Cemented Carbide >>>
- Supplier: Zhuzhou Kunrui Carbide Co. Ltd.
Share on (60510423873):
Product Overview
Description
Product Details
ISO Code | Grade | grain size | cobalt content | density: ≥ | hardness: ≥ | TRS(ISO3327):≥ | ||||||
K20-K30 | KU20 | 0.8um | 10% | 14.4 g/cm3 | 91.8(HRA) | 3800 N/mm3 | ||||||
Diameter: 18mm(+0.60mm-+0.30mm) Length: 330mm/305mm(0-5mm) or other length according customer require | ||||||||||||
Product Introduction
Tungsten carbide extruded rod
1.100% virgin material
2.Hip sintered, good performance
3.Various sizes and full types stock available
4.Products can be customized upon requirement
Features of tungsten carbide rod:
As for tungsten carbide rod, below are the general features for your reference
For more details of specific type, please inform us:
1.Better wear resistance, higher toughness, better deformation and fracture resistance, results in a long life and good size accuracy
2.Adopt advanced automatic extrusion equipment
3.HIP sintering and precision grinding to ensure the good performance
4.Both blank and finished tungsten carbide rods available
5.Can reach a mirror effect surface after accurate grinding and polishing
Applications:
For making the drill bits, end-mills, reamers
Quality control:
1.All raw materials are tested in terms of density, hardness and TRS before use, each rod will be drop from 1.2m higher place
2.Every piece of product goes through in-process and final inspection
3.Every batch of product can be traced
product parameter
Grade | Grain size (um) | Cobalt content (wt-%) | Density (g/cm3) | Hardness (HRA) | TRS (N/mm2) | KIC (MPa.m1/2) | ||||||
KU20 | 0.7 | 10 | 14.45 | 91.8 | 3800 | 10.5 | ||||||
KS610 | 0.6 | 10 | 14.45 | 92.2 | 4000 | 10.7 | ||||||
KU25 | 0.4 | 12 | 14.12 | 92.5 | 4200 | 10.2 | ||||||
KS508 | 0.5 | 8 | 14.5 | 93.2 | 4000 | 9.6 | ||||||
KU10 | 0.4 | 6 | 14.8 | 94.1 | 3800 | 8.7 | ||||||
KU209 | 0.2 | 9 | 14.45 | 94 | 4200 | 9.2 | ||||||
KU30 | 0.7 | 15 | 13.98 | 89 | 4500 | 13.8 | ||||||
KU20: Sub-fine grain size, processing by medium speed , good general performance, drill bits and end mills are recommended, suitable for cutting Ordinary alloy steel, aluminum alloy, heat resistant alloy, cast iron, etc. KS610: Ultra-fine grain size, excellent heat resistance, suitable for high-speed milling and drilling, Suitable to process alloy steel, heat-resistant alloy, cast iron, non-ferrous metals, stainless steel and other materials. KU25: Ultra-fine grain size, with good wear resistant and toughness, especially suitable for finishing and processing alloy steel, aluminum alloy, titanium alloy etc. Suitable for making endmills and reamer KS508: Suitable for processing hardened hard steel, aluminum alloy, glass fiber reinforced materials, high wear resistant material stainless steel, composite graphite, PCB, plastic KU10: Ultra-fine grain size，with good wear resistant, higher wear resistant endmill and engraving tool are recommended, suitable for processing Aluminum-magnesium alloy, composite sheet, PCB, plastic, glass fiber reinforced plastic etc KU209: Selected high-quality 0.2um ultra-fine tungsten carbide powder, with high wear resistance and toughness, suitable for finishing of hardened steel, high-precision and high-mirror processing of graphite, plastic, glass fiber reinforced materials, stainless steel and aluminum alloy. Suitable for making 0.25mm endmill, drills,boring tool. KU30: Sub-fine grain size, with good wear resistant and toughness, suitable for making punching of mould、anti-vibration boring bar etc. | ||||||||||||
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
