Shower waterproofing damp proof course material pp/pe waterproof membranes for bathroom
- Category: >>>
- Supplier: Weifang Xuxin Waterproof Materials Co. Ltd.
Share on (60519585108):
Product Overview
Description
damp proof course material pp/pe waterproof membranes for bathroom
Product Description
Description
Shower Liner is especially designed for waterproof in shower rooms and other wet area. This product is a composite sheet membrane made of soft polyethylene(PE) with nonwoven polypropylene(PP) fabric laminated on both sides to enable the membrane fixed firmly onto mortar.
Shower Liner is flexible and conforms to various contours of the wood framing, bending upward at the walls and folding into corners. It can be applied directly with thin-set mortar, ceramic and stone tile, provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile. It has been an ideal membrane to protect the substrate from moisture penetration.
Product features
l Light-weight and Eco-friendly;
l Pliable material and compatible with various shapes of base;
l Easy and fast installation, saving installing time and labor cost;
l Excellent moisture barrier performance.
Characteristic
1. Non-toxic, no pollution, environmental protecting product.
2. Can be used for many different surfaces, especially for cement basement.
3. Tough, impermeable, multi-layered sheet.
4. High tension strength, good cold flexibility.
Application
l Moisture barrier liners in showers, steam rooms, swimming pool surroundings;
l Interior application of ceramic and stone tiles;
l Other wet areas like shopping centers, food courts, commercial kitchens, etc.
Technical Data Sheet
Construction Method
1)The basic level must be clean, keeping moist.
2)Preparing cement paste, containing cement weighing 10% -15% polyvinyl binder,Mixing must be homogeneous,No precipitation,No clot,No segregation phenomenon can be used.
3)Before the construction of the main roof waterproof layer,firstly, the drainage and the places of complex structure should be dealled with well. The waterproof membrane on the the additional layer is the same as the main waterproof layer.
4)The seal material can use poly ether type polyurethane, if use other sealing materials , they should be free of mineral oil, petrolatum and other chemical substances affecting the performance of polyethylene products.
5)Corner should be paved by the additional layer; yin and yang angle, etc. are made of R = 20mm arc-shaped.
6)Waterproofing membrane should be paved, adhesive should be homogeneous on the basic level surface, after that immediately pave the waterproof membrane , in case of affecting the bond quality.
7)Paving the waterproofing membrane shall not wrinkle, not forcibly stretch the membrane, the air and the excess adhesive below the membrane should be dealled with well while paving the membrane, ensure the membrane spliced well with the primary surface and between the layers of membrane.
8)The lap width of the waterproofing membrane shall be not less than 100mm.
9)Upper-and-lower level and the adjacent membrane should be staggered to one-third of magnitude.
How to mix the cement and the adhesive power?
Put about 50kg-60kg cool water into the mixer, then moving the mixer and put 1 bag (500g)of the adhesive
powder slowly, then mix it for 3-5 minutes to the sticky extent, and then put 2-3 bags ( one bag is about 50kg )of the cement mixing homogeneously. ( 1 bag of the adhesive powder will be enough for about 80 sqm ).
If the construction is erect structure, it is about 50kg cool water, 1 bag of adhesive powder(about 50g) and 2 bags cement(about 100kg), if it is plane structure, you may obey the proportion in the first step mentioned.
The adhesive powder can only mix with the cement, the bonding strength can be up to the maximum after the cement becomes totally dry.
Accessories
Order process
Packaging & Shipping
Package & Shipping
Production Flow
Production Flow
Company Information
Company Information
Xuxin Waterproof Materials Ltd is one specialized supplier on waterproof materials.
Products got the approval of ISO9001, ISO14001, and some products can meet ASTM and CE international standards.
As a public company, we mainly supply SBS Modified Bitumen waterproof Membrane, PE/PVC/EPDM/TPO/HDPE Waterproof Membrane, Waterproof Coating, Drainage Board, Geotextile etc
Certificate show
Certificates as below :
Our Services
We respect your feedback after you have received the goods. We can promise an excellent service and a prompt delivery!
Your order is welcome at any time!
FAQ
We sincerely hope to establish a win-win cooperation relationship with you.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
