easy dissolve with cold water adhesive starch wall sticker

Product Overview

Description

Easy Dissolve With Cold Water Adhesive Starch Wall Sticker

 

It's designed for the application of all paper and cloth back vinyl fabrics/wallpaper including heavy duty requirements,also suitable for grass cloths.For use on new and old surfaces of plaster and wallboard.It maybe thinned as required. 

 

Storing conditions:

Store in dry location, guarantee for 24 months.                           

 

Features & Benefits:

Product is characterized by high efficiency and joint strength

Easy mixing with water

Creates an anti-fungal environment

Adhesive does not harm environment

Product is approved by National Institute

 

Typical technical data

Type	Modified potato starch
Colour	White flake
Density	300-350kg/m3
pH	Approx 9
ViscosityⅠ**	20000 mPa.s

Ph measured in solution1:30

Viscosity detemined in solution 1:30. Mesaurement taken after 2 mins.

 

Base preparation

Surfaces should be clean, dry and free from dust and flaking paint. Old wallpaper and loose paint must be removed before applying new wallpaper. If surface is highly absorbative it should be sized by primer.

 

Application

Dilute enough powder into water using the chart below. Stir to achieve a smooth consistency. Leave mixed product for approximately 5 minutes. After that, stir it again and it is ready-to-use.

 

Apply the adhesive to the wallpaper, follow wallpaper’s instructions. Starting from the top, roll paper in place, taking care to roll out air bubbles. Immediately remove excess adhesive and any adhesive on pattern side with damp cloth.

 

After dissolving adhesive may be stored for 7 days in closed bucket. Stir very well before use when was stored more than 1 day.