JL 288 PVC Plastic Rain Boots Injection Molding Machine

JL-288 PVC Plastic Rain Boots Injection Molding Machine

Kingstone Shoe-making Machinery is a manufacturer for various kinds of shoes making machine.

The machine is injection moulding machine, can inject the material directly to mould and one-time molding, get the finished boots. One machine is a production line, the finished products can directly sell. The machine need 1-2 workers to operate in production, the output is 80-100 pairs per hour for one color, 70-90 pairs per hour for two color, 60-80 pairs per hour for three colors. 

1. Raw Material: Suitable for all kinds of thermoplastic raw materials, foaming or non-foaming, such as PVC and TPR.

2. Products: Specially designated to manufacture different height full plastic rain boots and shoes.

3. The oil pressure circuit design ready for mold close will shorten the cycle time and upgrade productivity.

4. Pressure switch assures the locking strength by mold lock system for better product.

5.The turn table may run reversibly in case of emergency to eliminate the abnormality and upkeep the safety operation.

6. Furnished with mold air-blowing device, the finished products may be de-molded easily.

7. The reversible turntable in case of emergency will eliminate abnormality and upkeep safety operations.

8. Computerization in analysis and design, the machine is well in stability.

9. Conformed to human engineering in design, it features operational compatibility.

10. It could be equipped with air blowing system and can produce light weight, particularly the need for reinforced cooling effect.

 Welcome to visit our factory and check our machine.