High Chrome Alloy Slurry Pump Standard Spare Part A05 Impeller F6147

Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.

Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.

Slurry Pump Spares Material Selection

1) Impeller material selection: A05, A07, A49, A51, A33, A61, R08, R26, R33, R38, NR55, S01, S12, S21, S42, S50, U01, EPDM, PU, CR, Hastelloy 276-C...

2) Impeller Vanes from 3-6. It depending on the size of the particles in the slurry.

3) Impeller type including Close, Semi-open and Open type. Impellers are generally closed because of higher efficiencies and are less prone to wear in the front liner region. Open impellers are more common in smaller pumps or where particle blockage may be a problem or where the shear provided by an open impeller is an aid to pumping froth.

3) We can also produce the non-standard impellers for some special situations.

    Pumping coarse coal

    Pumping fibrous material

    Reduced diameter impellers

    Reduced eye impel

4) Other slurry pump Impeller part code no. such as: B1127NA, B1052, B15127NA, C2127, C2147, D3147NA, D3147, E4147R, E4147, F6147R, FAM8147, G8147, G10147, G12147, GAM14147, FG10137, GGH10137, GSH10145...