one component urethane polyurethane anticorrosive coating
- Category: >>>
- Supplier: SWD New Material (Shanghai) Co. Ltd.
Share on (60584602044):
Product Overview
Description
Product Description
SWD959 moisture cure polyurethane industrial anticorrosion protective coating takes one component polyurethane resin polymer as raw material. The film membrane is dense, compact and elastic, it can adapt to the slight deformation without cracks from vibration and weather changes on various metal structure of industrial enterprises. It avoids the penetration of air, moisture and other corrosion media to be anti rust of metal structure. The coating film has a lot of urea bond, biuret bond, urethane bond and hydrogen bond to make excellent physical properties and anticorrosion performance.
Application environment
Relative temperature: -5~-+35℃
Relative humidity: RH%:35-85%
Dew point: the temperature of metal surface must have 3℃ than dew point.
Application tips
Recommended dft: 100-200 (as design requirement)
Surface preparation: sand-blasting to above Sa2.5 degree, or polish to St3 class with electric tools.
Re-coating interval: 4-24h, if the interval time exceed 24h or has dust deposited, sand-blasting first and clean well prior to
application.
Coating method: airless spray, air spray, brush, roller
Application note
It can be applied in the low temperature below 10℃. Put the coating bucket into the air-conditioning room for over 24 hours when apply in the low temperature environment.
SWD recommends to agitate the coating uniform prior to application, pour accurate quantity of material to another vessel and seal well immediately. Don’t pour the rest liquid to the original bucket.
The viscosity of product is set up in the factory, thinner shall not be random added by the applicators. Call the manufacturer for the instructions of special thinner if the viscosity changed as the application environment and humidity.
Relative temperature: -5~-+35℃
Relative humidity: RH%:35-85%
Dew point: the temperature of metal surface must have 3℃ than dew point.
Application tips
Recommended dft: 100-200 (as design requirement)
Surface preparation: sand-blasting to above Sa2.5 degree, or polish to St3 class with electric tools.
Re-coating interval: 4-24h, if the interval time exceed 24h or has dust deposited, sand-blasting first and clean well prior to
application.
Coating method: airless spray, air spray, brush, roller
Application note
It can be applied in the low temperature below 10℃. Put the coating bucket into the air-conditioning room for over 24 hours when apply in the low temperature environment.
SWD recommends to agitate the coating uniform prior to application, pour accurate quantity of material to another vessel and seal well immediately. Don’t pour the rest liquid to the original bucket.
The viscosity of product is set up in the factory, thinner shall not be random added by the applicators. Call the manufacturer for the instructions of special thinner if the viscosity changed as the application environment and humidity.
Specification
item | value |
CAS No. | N/M |
Other Names | anticorrosive coating |
MF | N/A |
EINECS No. | N/M |
Place of Origin | China |
Shanghai | |
Main Raw Material | POLYURETHANE |
Usage | Appliance Paint, Boat Paint, Building Coating, Car Paint, Electrical Insulating Varnish, Road Marking Paint |
Application Method | brush, roller, spray |
State | Liquid Coating |
Brand Name | SWD |
Model Number | 959 |
Elongation | 360% |
Color | as customer's need |
pencil hardness | 2H |
Product packaging
25kg steel bucket
25kg blue steel drum,
20 durms per wooden pallet
210kg steel drum
steel drum,
4 drums per wooden pallet
part A 210kg, part B 200kg
Company Profile
SWD New Material (Shanghai) Co., Ltd. is invested by SWD Urethane Co. in AZ,USA, which is located at Lane.1688 Lianhang Road, Minhang District, Shanghai. we have set up a new manufacture base and R & D center for Polyurethane and Polyurea products(see pic left). We are a comprehensive polyurethane enterprise integrating scientific research, production, sales, project application and technical service for advanced product lines of anti-corrosion, waterproof and insulation system.
\t
Based on strong technical and marketing background and long polyurethane industry history and rich experience of the American Headquarters, SWD (Shanghai) Urethane Company has developed and produced spray polyurea waterproof and anti-corrosion coatings, express railway SPUA waterproof elastomer coatings, industry and construction anti-corrosion waterproof materials, PUA/PU one-component anti-corrosion waterproof coatings, roof and wall insulation waterproof foam-coating systems, polyurethane insulation materials applying to refrigerator, solar energy, and freezing facilities, wear resistant casting polyurethane elastomers, casting PU rigid artificial wood foams, PU low carbon energy saving tiles, as well as high reflection waterbase wall coatings, metal anti-corrosion coatings, etc.
\t
Based on strong technical and marketing background and long polyurethane industry history and rich experience of the American Headquarters, SWD (Shanghai) Urethane Company has developed and produced spray polyurea waterproof and anti-corrosion coatings, express railway SPUA waterproof elastomer coatings, industry and construction anti-corrosion waterproof materials, PUA/PU one-component anti-corrosion waterproof coatings, roof and wall insulation waterproof foam-coating systems, polyurethane insulation materials applying to refrigerator, solar energy, and freezing facilities, wear resistant casting polyurethane elastomers, casting PU rigid artificial wood foams, PU low carbon energy saving tiles, as well as high reflection waterbase wall coatings, metal anti-corrosion coatings, etc.
FAQ
Frequently Asked Questions
1. Who are we?
We are based in Shanghai, China, start from 2006,sell to Domestic Market(40.00%),Southeast Asia(12.00%),Oceania(9.00%),North America(6.00%),Northern Europe(5.00%),South America(5.00%),South Asia(5.00%),Central America(3.00%),Eastern Asia(3.00%),Mid East(2.00%),Africa(2.00%),Eastern Europe(1.00%),Western Europe(1.00%),Southern Europe(1.00%). There are total about 51-100 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
We have the ISO9001 quality management system certificate, we are PDA member and have standard test reports. We strictly implement the rules according to the quality standard in every aspects from the purchase of raw material to the production process and outgoing of products.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
We have the ISO9001 quality management system certificate, we are PDA member and have standard test reports. We strictly implement the rules according to the quality standard in every aspects from the purchase of raw material to the production process and outgoing of products.
3.What can you buy from us?
polyurea, polyaspartic, polyurethane foam, waterproof coating, anticorrosion coating, external wall water based coatings.
4. Why should you buy from us not from other suppliers?
Our company is dedicated for the product R&D, application and after-sale services on polyurea polyaspartic pu foam new materials, with a large production base, PDA member, agent of Graco machine.Welcome to be distributors of SWD China.
polyurea, polyaspartic, polyurethane foam, waterproof coating, anticorrosion coating, external wall water based coatings.
4. Why should you buy from us not from other suppliers?
Our company is dedicated for the product R&D, application and after-sale services on polyurea polyaspartic pu foam new materials, with a large production base, PDA member, agent of Graco machine.Welcome to be distributors of SWD China.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
