Share on:
Calcium Oxide Water Absorbent Masterbatch Moisture Absorber for Recycled Film of LDPE/ LLDPE/ HDPE
Recycled Polyethylene(PE) or Recycled Polypropylene(PP)usually contains some moisture, which will cause produce drain marks or bubbles and piercing on the surface of the final products if not eliminated, besides quality affected, the moisture even cause impossibility of processing.
Item | Desiccant Masterbatch |
Carrier | PE , PP |
Application | PP/PE blow film/molding/injection/extrusion/casting/sheet |
MFI(g/10min) | 15.0~25.0 |
Storage | seal, cool dry , away from direct sunlight |
Density | 1.75+/-0.1g/cm3 |
Moisture Absorbent Content | >65% |
Water content | ≤0.1 |
Moisture Absorbent Weight | 20%~30% of masterbatchs' weight |
Addition Rate | 1%-10% |
1. Can reduce or prevent the drain mark and bubbles by absorbing moisture
2. Can absorb the moisture equivalent to 28% of the weight of desiccant masterbatch
3. Not affect to production technology and process.
4. RoHS certificate
1. Check the condition of inner packing and forbid using if breakage.
2. Use over within 36 hours after opening the packing.
3. Adding rate:1%~10%
4. Mixed with the raw material.
5. Do not heat with recycle material
Application:
Packing:
Yang Tian Environmental Masterbatch Co.,Ltd. was founded in 2002, After more than 10 years of development, Guangzhou Yang Tian has become a professional plastic material manufactory in southern China with 3 sub factories.
Factory:
Certificate:
1. Do your precious Products need to protect from sunshine?
Indeed, if your precious products are using in the outdoor, we can add Anti-UV agent in the Masterbatch to make it more high Light/Color Fastness.
2. Do your precious Products need to be more white and get rid of bad smell?
Indeed, if your precious products are made of recycled plastics, we can add whiten agent or special fragrance agent in the Masterbatch to make it more white and get rid of bad smell.
3. How about the quality control of your products?
1) We pay great attention to quality control from raw materials to finished products, each production link meets the quality system of ISO9001-2008.
2) All products meet RoHS standard.
3) All products are approved by SGS.
4. How to get a quotation?
A). send us a sample
B). inform us your specific requirement your specific requirement:
a) Color( e.g. Pantone color number)
b) Pigment concentration
c) Final products application
d) Polymer carrier
e) Heat fastness level
f) Light fastness level
g) MFI
We will try our best to work out the relative solution to match your needs
5. What’s the shipping freight?
It will depend on the volume and weight of the materials. Pls. tell us the nearest seaport or airport, we can quote you specially.
Any Problems, Pls feel free to contact with us!