Share on (60611237789):
Item Name | Sublimation mdf key chain |
Item No. | 1005 |
Material | MDF wooden |
Size | 5.1*4.8CM |
Packing | 20 pcs/buddle |
Packing Size | Customized |
Temp & Time | 190℃/340℉, 80Sec. |
Consumable | Sublimation ink & paper |
Machine | Flat heat press machine |



The keychain is scattered in the box (as show) , after printing you can assembly its as the right picture show.
Each keychain have one OPP bag, after we assembly it, then can put our gift into this bag ( as show).



1.Print the image out on sublimation paper with sublimation ink in your Epson inkjet printer.
2.Peel off the transparent protective film which sticker on the frame sureface.
3.Use high temperatrue tape to fix the image facing in the printing side of the sublimation mdf frame.
4.Before heat transfer,we must to adjust the pressure,mid pressure is ok.
5.Open the power,then to setup the temperature and time:170℃, 80s.
6.Put the stone onto the silicone work platform, the paper is on the top, facing in the heating board.
7.When the temperature rised to 170 degrees, then press down the handle.
8.Take out the mdf frame when time is up. Peel off the paper.
9.Install the key ring, a beautiful keychain was finished.
We need to prepare the following machinery and materials before to make a beautiful MDF key chain. | ||||||||
1. Heat press machine. | ||||||||
2. Epson ink-jet printer(We always use L805 and L1800). | ||||||||
3. Sublimation inks. | ||||||||
4. Sublimation paper. | ||||||||
5. Silicone paper. | ||||||||
6. High temperature tape ( This one you can choose or not). | ||||||||


New products from manufacturers at wholesale prices