Newest Models Rvg Dental Sensor LM-10P X Ray Equipment
US $680.00-$950.00
High Quality Dental Centrifugal Casting Machine for Dental Laboratory
- Category: Other Dental Equipments >>>
- Supplier: Wuhan Jinguang Electronic Appliance Co. Ltd.
Share on (60617137631):
Product Overview
Description
Products Description
Dental Lab Centifuge Casting Machine
Specifications
Product size: | 37x37x27cm |
Packing size: | 40x23x23cm |
Weight: | 6kg |
Maximum rotation diameter: | 360mm |
Maximum spring torque: | 150N |
Maximum eccentric weight: | 1.25kg |
Maximum mold diameter: | 78mm |
Main unit x1
manual x1
Long handle tongs x1
Cradles (large, medium, small) x3
Cradles (large, medium, small) x3
3 cradles (large, medium, small): For mold placement
Long handle tongs: Used to transfer crucible or mold, 36.6cm long
JT-08 Centifuge Casting Machine
Usage
● The centrifuge uses the elastic force of metal spring to drive the horizontal bar to rotate through the central shaft to generate centrifugal force. One end of the horizontal bar is provided with a crucible and a support for fixing the mold, and the other end is equipped with a metal mound for balancing. Before casting, loosen the central screw on the horizontal bar and fix a mold on the bracket. After adjusting the balance, tighten the screw and remove the mold. Then rotate the horizontal rod clockwise for about 3-5 turns to tighten the spring, and then lift the jack post to fix the horizontal bar temporarily.
● During casting, the casting alloy is placed in the crucible, and then the roasted mold is fixed on the bracket. The opening of the casting mold is facing the crucible hole. The device with flame is used to heat the casting gold, and the alloy is fully melted. At this time, the left hand supports the metal mound of the horizontal bar, and gently moves the horizontal bar to make the kilogram column fall down. At the same time, the flame is turned away. Due to the spring force of the horizontal bar, it rapidly rotates in the counter clockwise direction, and the molten gold in the crucible is thrown into the mold cavity under the action of centrifugal force to complete the casting.
● During casting, the casting alloy is placed in the crucible, and then the roasted mold is fixed on the bracket. The opening of the casting mold is facing the crucible hole. The device with flame is used to heat the casting gold, and the alloy is fully melted. At this time, the left hand supports the metal mound of the horizontal bar, and gently moves the horizontal bar to make the kilogram column fall down. At the same time, the flame is turned away. Due to the spring force of the horizontal bar, it rapidly rotates in the counter clockwise direction, and the molten gold in the crucible is thrown into the mold cavity under the action of centrifugal force to complete the casting.
Notice
● Pay attention to the table is fixed firmly and the crucible is placed correctly.
● The working table must be equipped with good protection device to prevent molten metal from splashing out during operation, which may harm human body.
● During operation, pay attention to the inertia of spring tightening, and strictly prevent hand smashing.
● Keep the equipment clean and dry, clean the equipment and remove the residue after casting.
● The working table must be equipped with good protection device to prevent molten metal from splashing out during operation, which may harm human body.
● During operation, pay attention to the inertia of spring tightening, and strictly prevent hand smashing.
● Keep the equipment clean and dry, clean the equipment and remove the residue after casting.
Details Images
About Us
JINGUANG DENTAL - PPECISENESS DAY-TO-DAY THRIVING
Specialized in manufacturing dental products since 2006, we gained more than 30 National Patents. Covering an area of 34,000 m2, our company has more than 200 employees including 60 professional technicians and over 300 sets of specialized manufacturing facilities. Read more >>>
Exhibition
You are able to find us at international dental fairs, like IDS, IDEX, ADEEC, Dentech China and so on.
Workshop
FAQ
1. Q: Are you a factory or trading company?
A: We are a professional manufacturer for dental equipment. We specialize in this field more than 14 years.
2. Q: Where is your factory located? How can I visit there?
A: Our factory located in Jiangxia Dist, Wuhan city, within an hour's drive from Tianhe Airport and Wuhan high speed railway station. Welcome to our factory for visiting.
3. Q: How long for the production time ?
3. Q: How long for the production time ?
A: Normally production time of products is from 3 days to 15 days depending on the quantity ordered. If you need a rush order, contact our representatives to discuss your specific needs.
4. Q: Can you make certificate of origin (C/O) and Quality certificate?
A: Yes. If requested, certificate of origin and quality certificate can provide when goods are sent.
5. Q: Do you have EU or US certificates for your products?
A: Yes, we do. Our products have been exported to USA and EU countries since 2006.
6. Q:Can you provide samples?
A:Yes, we'll send the sample out after sample order confirmed.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
