24V Deep Cycle Battery 6S NCR 18650 25.5V Li Ion Battery Pack Made in China

24v  lithium polymer battery Applications 

mini 24v rechargeable battery for LED strip/panel/light

24v lipo battery for Camera/IP Camera

rechargeable li-ion battery 24v for Car camera recorder

Small 24v volt battery for Router/Switch

li-polymer battery for POS machine

lipo battery 24v Solar energy storage

24v li polymer battery pack for outside

24v lithium polymer battery for MP3

lithium battery 24v for drill

Ultra Thin 24v Battery Lipo for laptop

We have electric bike rear rack battery pack , dolphin 18650 battery pack , water bottle lithium battery , silver fish ebike battery , solar battery , triangle lithium downtube battery .

3.7V ,7.4V ,,,, are welcome ,

lithium battery 12v are fine to us .

Instruction:

1.turn on the switch on the battery,the red indicator on the battery will be on.  

2.when the red indicator of the charger adapter turn to green,then the battery is fully charged.

3.the indicator on the battery,it will always red.when the power of the battery use out,it will turn dark,though it has nearly 5% power,the red indicator will still on.

To charge

Switch on the adapter and the red light would be on .

Connect the point of the adapter to “DC In/Out”of the battery and the green light would be on,which indicates it starts to charge,the box does not finish charging unit the green light is off

To supply

Connect one point of the power wire to “DC In/out”of the battery and press the switch to “ON” and the other point of the power wire to any kinds of household appliances with the special technology,the inner circuit cut off 

Automatically in case of incorrectly use,resulting in no output.but you can renew its output so long as to recharging battery.

Caution 

Do use the specialized accessory to recharge.the input voltage of any appliance must be in the range of the output of the battery,otherwise it can do harm to appliance.

To avoid the descending capacity, the battery must not be put away over 1 year.

Away from high temperature,and kept in cool dry place.

  1. My battery pack stopped charging, what should I do?

A :Often if this happens it is due to the anti-spark feature built into the BMS. Say you did not properly make a connection somewhere and the wires sparked, the BMS would shut itself down to prevent damage to the system. If this happens the first thing you always want to do is to try resetting the BMS by using your charger to try charging through the discharge connector for a few seconds, maybe a minute. You just run a jumper (basically regular wires) from the charger's connector to the battery's discharge contact, making sure you go positive>positive and negative>negative.

2. How do i know when it is fully charged?

A: If your battery has a voltage display on it then you can tell that is fully charged based on the voltage readout, You can also test the voltage with a multimeter directly from the discharge connector.

3. Do you offer charger for battery?

A: Yes, we do

4.what's your MOQ ?

A: 1PCs

5. can i get a free sample ?

A: sample is fine , free sample you are thinking to much  .