Special Powder Coatings for Alloy Aluminum Wheel hub car rim

Special Powder Coatings for Aluminum Wheel-Hub

Introduction:

This series of special powder coatings for aluminum wheel-hub is designed by our company for inner wheel-hub protection and surface vanish. It has the features of smooth appearance, strong adhesion, good resistance to salt spray and complete free polish of the base powder. Our products have been widely adopted by well-known brand car company and wheel-hub manufacturer in both domestic and overseas market.

Series of products:

1,Clear Powder Coatings
   Acrylic clear powder

   Super-high transparent pure polyester powder coatings(latest product)
   Standard transparent pure polyester powder coatings
2,Base Powder

High leveling pure polyester base powder
High leveling epoxy/polyester base powder

Super-high leveling and high gloss epoxy/polyester base powder
Super-high leveling and low gloss epoxy/polyester base powder
Special function products (Breathing powder coatings,Electrostatic shield resistance powder coatings)

Property:

Feature: It has the features of smooth appearance, strong adhesion and good resistance to salt spray.

Density: 1.2~1.8g/cm3( Ingredient and color demand)

Particle size: Purpose demands, standard granularity  is 35-40 um, <10um powder <10%, >90um powder <0.5%.

Storage stability: This series of special powder coatings for aluminum wheel-hub should be stored below 35°C in a dry and well ventilated place away from source of heat, ignition and direct sunlight. If stored in an air-conditioner room, in order to avoid damp again, before using the powder, the powder should be kept at the room temperature or at the same temperature with the spray equipment. Under such condition, the powder can be stored stably for 12 months.

Extended, retest will be required. If the testing result meets the requirement, the powder can still be used.

Film Characteristics of acrylic clear powder and pure polyester clear powder

Film Characteristics of Special Base Powder

Field of Application:

For the purpose of inner wheel-hub protection and surface vanish, this series of Special Powder Coatings for Aluminum Wheel-hub is specially designed by our company to meet customers’ needs.we have gain the TS16949 certification for alumunium wheel.Kinte powder has been used on many famous car brands, such as BMW, Mercedes, Audi, Volkswagen, Opel, GM, Ford, Toyota, Honda and Nissan 

Packing and Transportation :

Cartons with double PP bags. N.W 20(25)kg/carton

Non-dangerous goods. It can be transported in various ways, but it should be away from direct sunlight, moisture, heat and chemicals.

Health and Safety :

All raw material of powder coating do not contain toxic substances, also no toxic gases when baking.However, during the use, dust-breathing should be avoided and the operator should wear dust masks and minimize the long-term skin contact with the powder coating. The coating adhered to the skin can be washed off with soap.