XLR Cable male to male cable
- Category: >>>
- Supplier: Changzhou Hitec Electronics Manufacture Co. Ltd.
Share on (606651764):
Product Overview
Description
Product Description
XLR Cable male to male cable
XLR is the ultimate audio connection. With its professional quality plugs and balanced design, the Cambridge AUD300 XLR offers
performance and value in equal measure.
XLR to XLR balanced interconnect
Available in 0.75M only
Backed by Cambridge Audio's 30 Day Satisfaction Guarantee
XLR cables use a flying earth cable to balance the signal and therefore greatly reduce distortion over the length of the cable.
It's this robustness that makes them popular in the professional field. In addition to this, the Cambridge AUD300XLR is shielded
not just once, but twice - with both a braided screen and aluminium Mylar one. Using Cannon XLR plugs which lock into place, the
AUD300 XLR gives an even more secure connection than RCA phono.
If you're using Cambridge Audio 700 or 800-Series hi-fi or a DacMagic DAC, then the AUD300XLR will take the connection quality to
a new level. Highly recommended!
This product is guaranteed for its lifetime against defects arising from design or assembly, material or workmanship.
The XLR connector was invented by James H. Cannon, founder of Cannon Electric in Los Angeles, California (now part of ITT
Corporation), and for this reason it was sometimes colloquially known as a Cannon plug or Cannon connector and in Japan as Cannon
jack, though this term has since fallen out of common usage in the industry.[citation needed] Originally manufactured as the
Cannon X series, subsequent versions added a latch (Cannon XL) and then surrounded the female contacts with a resilient
polychloroprene, which resulted in the part number prefix XLR.[2] There was also an XLP series which used a hard plastic
insulation, but was otherwise the same.[3] ITT Cannon originally manufactured XLR connectors in two locations Kanagawa, Japan and
Melbourne, Australia. The Australian operation was sold to Alcatel Components in 1992 and then acquired by Amphenol in 1998. ITT
Cannon continue to manufacture XLR connectors in Japan.
The Switchcraft corporation later started manufacturing compatible connectors, followed by Neutrik. Neutrik made a number of
improvements to the connector and their second-generation design (known as the X-series) had just four parts for the cable
connector and eliminated the small screws used by both Cannon and Switchcraft, which were prone to working loose, falling out, and
becoming lost. These improvements made Neutrik the most popular brand of XLR connector.
Unbranded XLRs are also made by far-east manufacturers. Originally these were copies of the Cannon or Switchcraft designs, but in
recent years the Neutrik designs have also been copied.
XLR male to female Plug Cable
O.D.:4 x 8mm
With Nickel Plated connectors.
Any other items are available.
OEM & ODM projects are welcome.
Welcome to inquire on us.
Thank you very much!
performance and value in equal measure.
XLR to XLR balanced interconnect
Available in 0.75M only
Backed by Cambridge Audio's 30 Day Satisfaction Guarantee
XLR cables use a flying earth cable to balance the signal and therefore greatly reduce distortion over the length of the cable.
It's this robustness that makes them popular in the professional field. In addition to this, the Cambridge AUD300XLR is shielded
not just once, but twice - with both a braided screen and aluminium Mylar one. Using Cannon XLR plugs which lock into place, the
AUD300 XLR gives an even more secure connection than RCA phono.
If you're using Cambridge Audio 700 or 800-Series hi-fi or a DacMagic DAC, then the AUD300XLR will take the connection quality to
a new level. Highly recommended!
This product is guaranteed for its lifetime against defects arising from design or assembly, material or workmanship.
The XLR connector was invented by James H. Cannon, founder of Cannon Electric in Los Angeles, California (now part of ITT
Corporation), and for this reason it was sometimes colloquially known as a Cannon plug or Cannon connector and in Japan as Cannon
jack, though this term has since fallen out of common usage in the industry.[citation needed] Originally manufactured as the
Cannon X series, subsequent versions added a latch (Cannon XL) and then surrounded the female contacts with a resilient
polychloroprene, which resulted in the part number prefix XLR.[2] There was also an XLP series which used a hard plastic
insulation, but was otherwise the same.[3] ITT Cannon originally manufactured XLR connectors in two locations Kanagawa, Japan and
Melbourne, Australia. The Australian operation was sold to Alcatel Components in 1992 and then acquired by Amphenol in 1998. ITT
Cannon continue to manufacture XLR connectors in Japan.
The Switchcraft corporation later started manufacturing compatible connectors, followed by Neutrik. Neutrik made a number of
improvements to the connector and their second-generation design (known as the X-series) had just four parts for the cable
connector and eliminated the small screws used by both Cannon and Switchcraft, which were prone to working loose, falling out, and
becoming lost. These improvements made Neutrik the most popular brand of XLR connector.
Unbranded XLRs are also made by far-east manufacturers. Originally these were copies of the Cannon or Switchcraft designs, but in
recent years the Neutrik designs have also been copied.
XLR male to female Plug Cable
O.D.:4 x 8mm
With Nickel Plated connectors.
Any other items are available.
OEM & ODM projects are welcome.
Welcome to inquire on us.
Thank you very much!
Related Products
HTP
HTP
HTP
Packing & Delivery
Packing
We have different types of packing.
Please check the follows.
PE bag Polybag
Pearl bag
Anti-static bag
Zipper bag
Color box
PVC box
Export Carton
Delivery
Delivery time is 10-20 days after order, according to orders.
By sea
By air
By express
Our Company
Company Name | ChangZhou Hitec Electronics Manufacture Co.,Ltd. |
President and Representative Director | SHAO LI WEI |
Company Address | HuaYang Village, NanXiaShu Town, WuJin District, ChangZhou City, JiangSu Province, P.R.C. |
Date founded | April 26, 2006 |
Capital | 50 million usd (as of March 31, 2016) |
Shareholders | Shareholder Composition |
Fiscal Year | From April 1 to March 31 of the following year |
Main Business Activities | Consumer electronics Production and Sales |
Business Sites | www.hitec-cables.com |
Number of employees (consolidated) | 500 (as of March 31, 2016) |
Factory
Office Room Show Room
Certifications
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
