Share on (60670115400):
SDS1202X-E,Support SCPI Remote Control Commands 200MHz Digital Oscilloscope
For quick reply
For more discounts
For update info : www.weLLzion.com
The SDS1000X-E series employs a new generation of SPO(Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglent’s latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC, SPI, UART, CAN,LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 million points FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra.
The new design also includes a hardware co-processor that delivers measurements quickly and accurately.
| Bandwidth | 200MHz |
| Sample Rate | 1GSa/s (Single Channel), 500MSa/s (Dual Channel) |
| Memory Depth (Max.) | 7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel) |
| Waveform Capture Rate (Max.) | 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) |
| Channel | 2+EXT |
| Vertical Resolution (A/D) | 8 bit |
| Vertical Scale(Probe 1X) | 500μV/div~10 V/div (1~2~5 sequence) |
| Rise Time (at input, typical) | Typical 1.8 ns |
| Overshoot (500 ps Pulse) | <10% |
| Horizontal Scale (s/div) | 1.0ns/div~100s/div |
| Timebase Accuracy | ±25 ppm |
| Display | 7 inch TFT-LCD (800*480) |
| Input Impedance | DC: (1 MΩ±2%) || (18 pF ±2 pF) |
| DC Coupling | DC, AC, GND |
| Channel Isolation | DC~ Max BW >40 dB |
| Max Input Voltage | 1 MΩ ≤400 Vpk (DC + Peak AC≤10 kHz) |
| DC Gain Accuracy | ≤±3.0%: 5 mV/div ~10 V/div ; ≤±4.0%: ≤2 mV/div |
| Probe Attenuator | 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X…… 1000X, 2000X, 5000X, 10000X |
| Waveform Interpolation | Sinx/x, Linear |
| Trigger Type | Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video |
| Trigger Coupling | AC, DC, LFRJ, HFRJ, Noise RJ (CH1~CH2) |
| Trigger Mode | Auto, Normal, Single |
| Trigger Accuracy (Typical) | Internal: ±0.2 div; EXT: ±0.4 div |
| Serial Trigger (Standard) | I2C, SPI, UART/ RS232, CAN, LIN |
| Decode Type (Standard) | I2C, SPI, UART/ RS232, CAN, LIN |
| Cursor Measurement | Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2); Track: Time X1, X2, (X1-X2) |
| Automatic Measurement | 38 Types |
| Waveform Math | + , - , * , / , FFT , d/dt , ∫dt , √ |
| Waveform Storage | 80,000 frames(Max.) |
| Communication Interface | USB Host, USB Device, LAN, Pass/Fail, Trigger Out |
| Power Supply | 100~240 VAC, CAT II, Auto selection |
| Dimension (W x H x D) | 312 mm(L)*134mm(W)*150mm(H) |
| Weight | N.W: 2.5kg; G.W: 3.5kg |
Waveform Capture Rate Up to 400,000 wfm/s
256-level intensity grading and color temperature display

SDS1000X-E has a wealth of trigger modes, including edge, slopes, pulse, video, Windows, less amplitude, interval, timeout, pattern, IIC, SPI, UART/RS232, LIN, CAN
Serial bus decoding function (optional)
History Waveforms (History) mode and segmented acquisition (Sequence)
Gate and Zoom Measurement

New products from manufacturers at wholesale prices