Top sale drinking water quality testing kit with reagent and meter, drinking water test kit for aquaculture
- Category: Other Test Instruments >>>
- Supplier: Guangzhou Jubway Technology Co. Ltd.
Share on (60670648528):
Product Overview
Description
F01 Product list of the kit
No. | Product Name | QTY | Functions |
1 | TDS meter(A10) | 1 piece | Detect TDS value |
2 | Mineral meter(A15) | 1 piece | Used to detect mineral content in water |
3 | Water quality electrolyzer(A17) | 1 piece | Test water impurities. |
4 | Bleach reagent (B12) | 2 bottles | Increase chloride ion content in water samples |
5 | Blue Ink / Industrial Contamination Reagents (B16) | 1 bottles | Check whether the water purifier can filter the pigment |
6 | Phenolphthalein reagent (B03) | 1 bottle | Detection of PH value of 8.2-10 solution |
7 | Total hardness reagent(B10A) | 1 bottle | For the determination of total hardness in water |
8 | Residual chlorine reagent (B01) | 7 bottles | Detection of residual chlorine content |
9 | PH reagent (B02) | 7 bottles | Check the PH value of the water sample |
10 | Heavy metal reagent(B26) | 1 bottle | Test whether there is heavy metal in water sample |
11 | Active water reagent (B28) | 1 bottle | Check whether the water sample is active water |
12 | Calmagite reagent (B05) | 1 bottle | Test whether the water sample contains calcium and magnesium ions |
13 | Nitrite reagent (B14) | 2 bottles | Testing the health status of tap water |
14 | Beakers (pc material) | - | Used to hold the water samples to be tested，including 4 100 ml beakers |
15 | Others | - | Large color card, small drop tube, stirring spoon |
F02 Product display and structure details
F03 Product instructions
Use steps of TDS meter
Step 1:Press "ON/OFF" key to turn on
Step 2:Put the tds meter insert into water
Step 3:When the TDS value become stable ,you can read the TDS value(ppm)
Step 2:Put the tds meter insert into water
Step 3:When the TDS value become stable ,you can read the TDS value(ppm)
Cautions of TDS meter
1.After each test, pay attention to cleaning the probe.
2.Water sample temperature, probe cleanliness and air bubbles all affect
the determination of tds.
the determination of tds.
3.TDS meter can't test high tempreature (for example:boiling water).
Use steps of mineral meter
1.Before detection,press "on/off" key, if the first lamp corresponding to "0" is light up,it means that the TDS mineral meter is working .
2.Push"switch" key to "LO" side, the biggest reading correspongding to lighted yellow indicator on the side is the mineral content of the water.
If red indicator light up, then push "switch" key to "HI" side ,the biggest readout corresponding to yellow indicator on the right side is the mineral content of the water.
If red indicator light up at "HI" side,it means that mineral content of the water is above 400 ppm.
2.Push"switch" key to "LO" side, the biggest reading correspongding to lighted yellow indicator on the side is the mineral content of the water.
If red indicator light up, then push "switch" key to "HI" side ,the biggest readout corresponding to yellow indicator on the right side is the mineral content of the water.
If red indicator light up at "HI" side,it means that mineral content of the water is above 400 ppm.
Cautions of mineral meter
Note:During testing, press and hold down "on/off" key until finish test.
Use steps of Water quality electrolyzer
1.Take 2 transparent glasses with capacity, 1 cup of tap water or well water, another cup of purified water or distilled water and place on the table (as photo)
2.Put the electrolyzer into the water
3.Adsorb the magnetised cover to the base of electrolyzer (before power on ,please ensure human body away form magnetised cover).
4.Plug in the power cord and start testing.During testing ,do not touch electrolyze.
5.Nomally electrolysis time is approximate 30 second.
6.After finish testing,firstly unplug the power cord,afterwards take out electrolyzer.
2.Put the electrolyzer into the water
3.Adsorb the magnetised cover to the base of electrolyzer (before power on ,please ensure human body away form magnetised cover).
4.Plug in the power cord and start testing.During testing ,do not touch electrolyze.
5.Nomally electrolysis time is approximate 30 second.
6.After finish testing,firstly unplug the power cord,afterwards take out electrolyzer.
Cautions of Water quality electrolyzer
1. The length of electrolysis is affected by the TDS value of water quality (recommended):0~70ppm 60 seconds; 70~120ppm 35 seconds; 120~200ppm 25 seconds; 200~300ppm 15 seconds;More than 300ppm easily burn out the circuit, not suitable for electrolysis.
2. Do not use metal containers for water samples. Be careful about short circuits.
3. Minors do not do this experiment,Prevent electric injury
4. When electrolysis, Do not touch the iron rod、Aluminum rod and electrolyzed water samples.
2. Do not use metal containers for water samples. Be careful about short circuits.
3. Minors do not do this experiment,Prevent electric injury
4. When electrolysis, Do not touch the iron rod、Aluminum rod and electrolyzed water samples.
Instructions for use of various reagents
Bleach reagent
Test item: Increase chloride ion content in water samples
Usage:
1. Take 20ml water sample
2. Dip 2-3 drops residual chlorine reagent in water sample & shake well
3. when residual chlorine reagent can not detect residual chlorine,You can use dip1drop of bleach reagent. The water sample turns yellow, indicating that the residual chlorine reagent is effective.
Usage:
1. Take 20ml water sample
2. Dip 2-3 drops residual chlorine reagent in water sample & shake well
3. when residual chlorine reagent can not detect residual chlorine,You can use dip1drop of bleach reagent. The water sample turns yellow, indicating that the residual chlorine reagent is effective.
Blue Ink / Industrial Contamination Reagents
Test item: Check whether the water purifier can filter the pigment
Usage:
1.Take 50ml water sample
2.Dip 5 drops reagent in water sample & shake well
3.After filtering through the water purifier,the color of the water sample changes from blue to colorless.indicating the the water purifier can filter the pigment.
Usage:
1.Take 50ml water sample
2.Dip 5 drops reagent in water sample & shake well
3.After filtering through the water purifier,the color of the water sample changes from blue to colorless.indicating the the water purifier can filter the pigment.
Phenolphthalein reagent
Test item: Detection of PH value of 8.2-10 solution
Usage:
1.Take 50ml water sample
2.Dip 2-3 drops reagent in 50ml of water sample & shake well
3. The color changes to magenta, indicating that the ph of the water sample is between 8.2 and 10,and the colorlessness indicates that the ph of the water sample is not between 8.2 and 10.
Usage:
1.Take 50ml water sample
2.Dip 2-3 drops reagent in 50ml of water sample & shake well
3. The color changes to magenta, indicating that the ph of the water sample is between 8.2 and 10,and the colorlessness indicates that the ph of the water sample is not between 8.2 and 10.
Total hardness reagent
Test item: For the determination of total hardness in water
Usage:
1. Take 5 ml of water sample
2.Dip 1 drop and shake, water colour will be red. then add one more drop and shake, if the water colour still red add more drops and shake on every drop until the colour.
3.shake well until water color changed from red to blue, and remember the number of drops dropped in water.Calculation method: 1 drop = 1°fr
Usage:
1. Take 5 ml of water sample
2.Dip 1 drop and shake, water colour will be red. then add one more drop and shake, if the water colour still red add more drops and shake on every drop until the colour.
3.shake well until water color changed from red to blue, and remember the number of drops dropped in water.Calculation method: 1 drop = 1°fr
Residual Chlorine Reagent
Test item: Detection of residual chlorine
content in water
Usage:
1.Take 30ml water sample
2.Drip 3 or 4 drops of residual chlorine reagent into 20ml of water sample and shake well.
3. Compare the water colour with the colour chart, to get the residual chlorine value(ppm or mg/L).
content in water
Usage:
1.Take 30ml water sample
2.Drip 3 or 4 drops of residual chlorine reagent into 20ml of water sample and shake well.
3. Compare the water colour with the colour chart, to get the residual chlorine value(ppm or mg/L).
PH reagent
Test item: Test the ph value of the water
Usage:
1.Take 30ml water sample
2.Drip 3 to 4 drops of PH reagent into the water sample and shake well
3.Compare the water colour with the colour chart,to get the PH value of the tested water.
Usage:
1.Take 30ml water sample
2.Drip 3 to 4 drops of PH reagent into the water sample and shake well
3.Compare the water colour with the colour chart,to get the PH value of the tested water.
Heavy metal reagent
Test item: Test whether there is heavy metal in water sample
Usage:
1.Take 20ml water sample
2.Dip 3-5 drops reagent in water sample& shake well
3. Red indicates that the water sample contains heavy metals, while yellow does not contain heavy metals.
Usage:
1.Take 20ml water sample
2.Dip 3-5 drops reagent in water sample& shake well
3. Red indicates that the water sample contains heavy metals, while yellow does not contain heavy metals.
Active water reagent
Test item: Check whether the water sample is active water
Usage:
1.Take 30ml of water sample
2.Dip 5 drops of this reagent, stir for 3-5 seconds
3.If the water sample turns red, it is the original ecological water (active water). If the water sample turns yellow, it is non-original water (Not active water)
Usage:
1.Take 30ml of water sample
2.Dip 5 drops of this reagent, stir for 3-5 seconds
3.If the water sample turns red, it is the original ecological water (active water). If the water sample turns yellow, it is non-original water (Not active water)
Calmagite reagent
Test item: Test whether the water sample contains calcium and magnesium ions
Usage:
1.Take 10ml water sample
2.Dip 1-2 drops reagent in water sample& shake well
3. The water sample turns purple red to indicate that it contains calcium and magnesium ions (having a certain hardness), and the blue color indicates that the water sample does not contain calcium and magnesium ions.
Usage:
1.Take 10ml water sample
2.Dip 1-2 drops reagent in water sample& shake well
3. The water sample turns purple red to indicate that it contains calcium and magnesium ions (having a certain hardness), and the blue color indicates that the water sample does not contain calcium and magnesium ions.
Nitrite reagent
Test item: Used to detect nitrite content in water quality
Usage:
1. Take 5ml water sample
2.Dip 10 drops reagent in water sample & shake well & Wait 5 minutes
3.According to the color of the water sample, the color value can be obtained.
Usage:
1. Take 5ml water sample
2.Dip 10 drops reagent in water sample & shake well & Wait 5 minutes
3.According to the color of the water sample, the color value can be obtained.
F04 The kit is widely used in many industries
F05 Our company and factory profile
We can provide OEM or ODM services, water quality testing products can be customized
Guangzhou Jubway Technology Co.,Ltd was established in 2009 in Guangzhou and specialize in water quality testing devices over 15 years.
We are one professional enterprise with a combination of research,design, manufacture andsales, we have our own brand of Jubway. We are skilled in R&D and has developed series of patented products, such as TDS meter, electrolyser,minerals testing meter,color comparator and so on. Meanwhile, we have long-term cooperative clients both in china and abroad.
We are one professional enterprise with a combination of research,design, manufacture andsales, we have our own brand of Jubway. We are skilled in R&D and has developed series of patented products, such as TDS meter, electrolyser,minerals testing meter,color comparator and so on. Meanwhile, we have long-term cooperative clients both in china and abroad.
F06 Product packaging and Shipments
We can pack the product as per the client's requirement.
1. We coopeate with professional and stable logistic forwarders for air
shipments, sea shipments and express shipments.
shipments, sea shipments and express shipments.
2. We also can use appointed logistic forwarders by our clients.
F07 Why Choose Us?
1. We are a professional manufacturer in producing water testing devices with design and development team since 2012 in guangzhou.
2.We are factory and accept OEM&ODM.
3. Our scientific testing process and strict quality control system ensure the reliable quality of our product.
4. We have material suppliers with long term good relationship and implement scientific factory management, it ensure we can offer our clients competitive price and cost-effective products.
5. We have quality experienced sales team with over 10 years experience in foreign trade.
6. We establish good relationship with main logistic forwarders, it help us to provide reliable service and most competitive logistic price to our esteemed clients.
2.We are factory and accept OEM&ODM.
3. Our scientific testing process and strict quality control system ensure the reliable quality of our product.
4. We have material suppliers with long term good relationship and implement scientific factory management, it ensure we can offer our clients competitive price and cost-effective products.
5. We have quality experienced sales team with over 10 years experience in foreign trade.
6. We establish good relationship with main logistic forwarders, it help us to provide reliable service and most competitive logistic price to our esteemed clients.
F08 Contact Information
Name: Mr. Sun
Mobile/ Whatsapp: 0086-15817070426
Skype: 86-15817070426
Mobile/ Whatsapp: 0086-15817070426
Skype: 86-15817070426
We Recommend
Flange Connection Liquid Closed-loop Sampling System Device
US $46.00-$216.00
Ce Rohs DY32 Digital Lux Light Meter Lumen Meter Quantum Meter
US $9.95-$13.99
DO-957 Water Testing Meter low cost dissolved oxygen sensor
US $58.00-$66.00
KH300T Hand-held Digital Paperless Temperature Recorder
US $400.00-$1200
New Arrivals
New products from manufacturers at wholesale prices
