Best quality automatic wall cement plater rendering machine

 Description:

1.Auto-Positioning System: The all new TUPO 8 E-CONTROL PLUS series is equipped with a state of art, computerized device that can automatically detect the wall plumb, and immediately define the exact adjustments, in order to correct any unevenness.

2.Remote control

3.30% more bigger mortar tank capacity .

4.Electrically control the flip of plastering trowel,more accurate.

5.render start from ground 28cm.

6.Electric components from international brands Siements,Omron,Japan IDEC,Phoenix.

7.Light weight for the machine,it is easy to move.

8.Easy operation and easy maintenance.

Plastering machine technical parameter:

Feature:

Save the valuable time for projects,reduce labor cost,increase the productivity,high efficiency and good quality.

Stable function,easy to operate.

Render up to 5m.

Remain high quality,render below or above window opening.

Easy maintenance

Application:

1. Automatic wall rendering machine is the ideal equipment for residential buildings, office buildings,school building,etc.

2. It can plaster on cement wall, brick and concrete wall, hollow wall , light body brick, baking free brick wall etc.

3. The rendering material could be lime, cement mortar , foam mortar, gypsum etc.

4. It could be adjust different thickness to suit each operation.

Wall effect

Our Machine Step 

Our boss Mr wang use 12 years to research and development the plastering machine,from TUPO-2 to TUPO-8,The technolog and performance improve continually,TUPO-8 can put the mortar to the self-flipping ash hopper directly,it solves the construction problem that the height of  window and door is less than 50cm,TUPO-8 is the first development construction technique that can  work at beam and below the beam,only our factory can produce TUPO-8 in china.

The contrast between Plastering machine  and  manual plaster   

Our boss-Mr wang,who is the original inventor of plastering machine,he use 12 years to development and research the plastering machine,China CCTV channel  come to our factory and special interview our boss for his achievement, the world start to know such machine from that interview,customers are attracted to the convenience,efficiency,innovative of the plastering machine,we are constantly breaking through and perfecting our technology,the new stype TUPO 8 come out,which is good performance and high efficiency.

I. What is RENDERING MACHINE?

RENDERING MACHINE is also called Automatic Rendering Machine, Automatic Plastering Machine, Wall Rendering Machine, Wall Plastering Machine Etc. It is unique and perhaps one kind of automated rendering machinery ideally suitable for the construction/building industry. It works with conventional cement mortar which brings it to a smooth, flat finish with variable and adjustable thickness to suit each application.

II. What finish can be achieved?

Depending on how fine or course the sand is, our RENDERING MACHINE can produce smooth and flat render finish.

III. How much thickness should be applied?

The same principles apply as the way you render by hand. However, if required, RENDERING MACHINE enables you to achieve from 5 mm up to 30mm render.

IV. What is the render height ?

It can reach up to 5 meters.

V. How is the render quality?

There are two vibrators on the rendering trowel, which gives you a high quality render. RENDERING MACHINE enables you to get finish render as follows:

Vertical : the difference between top and bottom is within 2 mm.

Horizontal: the difference from side to side is within 2 mm.

VI. Does machine need a special mix or compound?

No, the mortar recommended for RENDERING MACHINE is the same mortar that you use when render by hand. It can work with the traditional cement mortar, however lime or gypsum or other additives can be added into the mixture if needed.

VII. How is RENDERING MACHINE used?

Operating our RENDERING MACHINE is as easy as 1, 2, 3.

1. Secure machine

2. Load mortar

3. Press start button

VIII. Is it difficult to operate RENDERING MACHINE?

No. It’s very easy to operate RENDERING MACHINE and it doesn’t require special or advanced technical training. Half a day’s training is enough for a person to operate machine themselves.

I. Normally the service life of our machines can be 3-5 years.

II. We offer 1 year Quality Warranty for our machines.

III. We offer full set of easy-spoiled spare parts and tools for back up.

IV. We can send our engineer abroad to training customers to operate the machine.

V. We resolve any problem together with our customers.

Contact