G 330 Angle Miter cutting band saw

G-330 Angle Miter cutting band saw

Description of G-330 Angle Miter cutting band saw :

The Miter cutting band saw is mainly used for cutting large size black metal materials, such as round, square and profiles, etc., it can also be used for cutting non-ferrous metal materials, mainly used in the industries of mechanism of cutting metal materials. Due to cutting tool is double metal band sawing, as a result, when cutting incision narrow, the required power is small, less waste of materials, is the national key popularized and cutting energy and materials saving new technology, new equipment. The Miter cutting band saw is also a kind of distinctive new cutting equipment in China.

Our brand horizontal type,vertical type,double-coloum type and portal type automatic and semi-automatic metal band sawing machine,with the advantage of high technical content,effciency,energy-saving,reasonable structure,stable quality and so on,being widely used in cutting or sawing ferrous and non-feerous metal,plastic and nonferrous material.Our products are the necessary equipment in the field of metal products,Machinery Manufacturing,forging manufacturing.With the business objective of "Quality first,reputation utmost,service suoreme",we warmly welcome old and new customers to build briliant future with us hand by hand.

Use instructiongs of G-330 Angle Miter cutting band saw :

1.Band sawing machine operation and repair personnel must undergo professional training, grasp the band sawing machine operation and repair skills. Operators should ensure adequate sleep and keep the energy focused.

2.Before you change the speed, you have to stop the machine and then open the protective cover, turn the handle to make the belt loose, place the triangle belt in the groove of the required speed, tighten the belt and cover the shield

3.When adjusting the iron chip removing wire brushes, the wire brushes should make contact wire with the tooth of the saw blade, but not beyond the tooth root. Pay attention to observe wire brush to remove iron.

4.According to the size of the workpiece, you need to adjust guide arm along the dovetail and lock the guide device after adjustment.

5.The maximum diameter of the cutting material shall not exceed the requirements and the work piece must be held firmly.

6.With the proper degree of tightness of saw blade, speed and feed amount must be appropriate.

7.When making Iron, copper, aluminum products, cutting fluid is banned.

8.If the blade is broken, after the replacement of new blade, you must turn the work piece and resaw.

9.The operator is strictly forbidden to leave the job, and it is forbidden to operate with gloves.

10.Every time you are off work, you must cut off the power supply, open the protective cover, remove from the chip around the cutting wheel.

Features of G-330 miter cutting band saw:

1. The angle of cutting frame is ±45° or -60°, suitable for cutting different angles of different materials

2. Sealed maintenance-free worn reducing system guarantee the permanent lubrication,

Which also extend the working life of the band saw blade

3. Optional:\tAutomatic control for angles; automatic feeding system

Features of G-400 G-500 G-600 miter cutting band saw:

1. The max angle of cutting frame is 45°

2. Double column structure for higher stability and accuracy

3. Sealed maintenance-free worn reducing system guarantee the permanent lubrication, which also extend the working life of the band saw blade

4. Optional: Automatic control for angles; automatic feeding system; cutting angles of 60°