Share on (60683867907):

Specification | 13.5cm*32.9cm |
Material | Stainless Steel 304 |
Color | Silver or black powder coating |
Feature | Recycling,eco-friendly |
Logo | custom |














Trouble shooting | Solution |
Leaks gas as soon as the cartridge is installed | 1.Make sure the regulator dial is off turned all the way counter close 2.Tighten the cartridge seal Replace the CO2 cartridge it is damaged |
Make sure the CO2 cartridge is installed, the cap is turned on, and pressure is indicated on the pressure gauge. | |
without stopping when closed | 1.A few drips after closing the tap is normal. But it should not drip over time. 2. If the keg and tapping system is clean, internal O-ring may have worn through use and be in need of replacement. |
1.First pour may be foamy if the beer line is full of air after being filled or the tap assembly has been allowed to warm up. Second beer should pour fine, if that’s the case. Keep out of the sun. 2.Beer may be highly carbonated from the bar or brewery. If beer in keg is pressurized at 5 psi but came from brewery beer line pressurized at 25 psi, beer will pour foamy until the pressure equalizes after few days in the keg. Be sure to open the tap handle fully and let go during the pour. Attempting to meter the flow during the pour can lead to foaming. |
Beverage type | Pressure |
Stouts, Porters, Cream Ale, Barley wine | 3-6 psi |
Brown Ale, Amber, Reds Ale | 5-8 psi |
IPA, Pale Ale, Wheat Beers, Other Ales | 7-10 psi |
Lager, Pilsners, Ciders, Kombucha | 9-12 psi |
Sparkling Wine, Soda | 12-15 psi |
1) Can I put my company logo on growlers?
Absolutely. Pls send us your VECTOR logo artwork by PDF, AI or EPS format, and then we can choose suitable logo printing method for you. Currently we can do silk screen/etching/laser engrave/powder coating on the growler. There will be an additional cost associated with this and we may require a minimum order.
2) Can I use my own CO2 tank and regulator?
Yes, simply remove the regulator and connect the CO2 line to the grey ball lock connector/SS twist tube.
3) Can you ship CO2 cartridge to us?
The CO2 cartridge belongs to hazard product, so can not shipped by air. If shipped by sea, then we can supply. Suggest you can also source CO2 cartridges locally.
4) What is sample time and production time?
Existing sample: 2-3 days /Customized sample:7-10 days Mass production time: 2-3 weeks (That's all depends)
5) What payment method do you accept?
We are quite flexible about payment, we accept T/T, Paypal, Western Union, Trade Assurance, L/C etc.
6)Can I get a free sample?
yes, pls contact our sales.
7) What business term can we choose?
EXW, FOB, CFR, CIF, DDU. Sometimes DDP is also available.23)
New products from manufacturers at wholesale prices