Share on:
1.2 technical parameter
1.Inlet diameter: 0.5mm-1.0mm
2.Outlet size: 0.07mm-0.25mm(Elongation of annealed wire25%to 32%)
3.Max.mechanical speed: 2000m/min
4.Dies number: 24,Dies size 25mm*8-10mmT
5.Slip ratio :13%+8%
6.Wire drawing mode standing-mode and 4axes
7.Drive by inverter control,Brand Inovance,Most widely used brandin drawing machine
8.Main motor:11KW ,spooler motor:3.7W ,China best brand
9.Annealing voltage:DC 50V/max,Annealing current:DC 300A/max,Annealing power:11KVA
10.Annealing method DC Three section annealing
11.Annealing protection wil be done by steam protection
12.Capacity of compressed air 0.4-0.6Mpa,20L/min
13.Demand Water quantity for annealing and coolant 200L/min
14.Machine frame welded by steel plate
15.Transmission:Flat belts
16.Capstan Ceramic plasma
17.Lubricating system Pipe Spray
18.Bobbin size 300mm,loading capacity:50kg/max
19.Bobbin loading&unloading type shaft type
20.Traversing unit110W synchros motor,width:270mm/max
21.Tension control by air pressure tension control(With weight balance as back up)
22.Cabinet 0.8m*0.6*m*2m
23.Machine dimension 2.3m*1.6m*1.9m;Installation Area 3.3m*1.7m+0.8*0.6m
24.Machine weight 3400KG,Cabinet weight 500KG,In total for shipping around 4000KG
1.Ceramic coating
2.Loading&unloading the capstan,fixed tightly by cone model,the capstan could be displaced according to the die location. Loading and unloading easily,to avoid break the precision of axes.
1.4 Traverse unit
1.synchros motor ,stable and react fast
2.The bearing is slippery,high rigidly and fray slowly