automotive /car Roller brake opposite force tester (no lift) test equipment for vehicles

Product Overview

Description

car/  automotive test equipoment; brake test equipment

 

Its main for car brake performance testing. The reaction roller brake tester can detect and calculation the each axis (around round) block force of car, brake force and the deviation of brake force (process deviation, and maximum deviation), as well as the ratio of brake force and axis load , the ration of hand brake force and whole quality of the car. The equipment is core part of the motor vehicle security performance detection and the high technical performance requirements of safety testing equipment. 1.airframeUSES the integral welding, high strength, no anchor bolt installation, convenient debugging
2.HIgh strength adhering sand roller, high strength, can guarantee 200 thousand times test, the adhesion coefficient is 0.85 or higher
3.Reduction box made by the European technology; through the ISO9001 international quality

 

Corundum-coated roller surface more enduring the long life time ,The roller friction coefficient is more than 0.85,which is near the actual road condition. high speed roller (245mm * 1100mm), with the third cylinder, the whole frame, no anchor bolt installation,  Motor power (kw):2×15.Braking force measurement range (kN):2×(0---45), the slip rate is adjustable, with calibration device. 

 

 

 

system certification4.Mixer zonal air lift device and without air lifting device for the user to choose from(Plus 7 thousand yuan plus lift)5.The third roller can response and stop the motor automatically to avoid the wear of the tyre after the tyre locked during the testing