Share on:
Oxyhydrogen accesseries hho flashback arrestor for torch
The Flashback Arrestor is made of brass, the surface is treated by chrome plating, and the product is more bright,When the customer uses, the Flashback Arrestor is connected to the middle of the leather pipe,It is not necessary to tighten the thread and nut as the conventional tempering preventer, so it is convenient and quick to use.The working medium is oxygen, acetylene, propane, the working pressure is low pressure type (Mpa), the rated flow is 3-8 (m3/h), the working aperture is 6 (mm), the principle of action is dry, the device position is post type, the material is all copper.
Products: pressure reducer, cutting gun and Flashback Arrestor.
Types of Flashback Arrestor | Design application range |
Tube end-deflagration type | Used to prevent explosion of storage tank or process equipment that induced by unrestricted deflagration enters the pipeline |
Pipeline -deflagration type -Detonation barrier type | -used to prevent the flame of subsonic speeds -used to prevent the flame of subsonic speeds and high explosion pressure |
Applicable | Flashback Arrestor performance |
1.Pipes conveying flammable and combustible gases | 1.Flashback Arrestor shell can withstand 1.5 times of Hydrostatic test, no participation. |
2.Ventilation ducts with explosion hazard system | 2.Assembled Flashback Arrestor able to withstand the design pressure of the rigorous hydraulic test, no participation. |
3.Pipes for storing petroleum and petroleum products | 3.Deflagration Flashback Arrestor continuous withstand 13 deflagration type test,Each must be guaranteed |
4.Petroleum recovery system | Preventing subsonic flame passing through. |
5.Exhaust system of internal combustion engine | 4.Deflagration Flashback Arrestor continuous withstand 13 deflagration type test,Each must be guaranteed |
6.Marine operating platform and flare system | Preventing subsonic flame passing through. |