18AWG Wire 100ct a string DC12V 12mm WS2811 addressable RGB led smart pixel node IP68 lights string

1.RGB Pixels are digitally-controllable lights you can set to any color, or animate
2.Each RGB LED and controller chip is molded into a 'dot' of silicone.
The dots are waterproof and rugged.
3.There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick
4.They are typically used to make outdoor signs. Compared to our other 20mm LED dots these are diffused 8mm LEDs so they are not as bright but they color mix a little nicer.
5.The pixels are connected by a 3-conductor cable. Red is +5V, Yellow is Ground, Green is Data and Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end.
6.Each dot is digitally controlled, with an internal 5 bit PWM LED driver (15bit color for 32,768 different shades).
The pixels must be clocked by a microcontroller
The pixels use 8mm diffused RGB LEDswith brightness of about 300 mcd per individual r/g/b LED.

T-1000S,T-100K,T-200K,T-300K are all ok, Programable by Software" Lededit 2014"
Individually Control
Conformal Coating,PVC glue protection
IP68, Water-proof protection
Easy installation (punching 12mm hole on metal panel)

1. Ferris Wheel, Merry-Go-Round, Pirate Ship, Pendulum, Bumper Car, Rotor etc amusement rides, castles, carnival, funfair ground, attractions lighting.
2. Logo, signage, exposed luminous characters, channel letters, advertisement billboard.
3.Stage, nightclub, pub, KTV entertainment, Bars, Discos, building decorative lighting, bridge edge decoration Building contour,large shopping malls outside wall, Hotel, square street, outdoor AD signs, Logo and other places.
4. Display screen, painted screen, led light project, light engineer etc.