Spike cap, Spike, Air Vent, Drip chamber, Filter, Tube, Roller clamp, Latex free Injection site , Connector luer lock, With / without needle
Features: 1. With CE/ISO13485/ISO9001/GMP/FSC 2. Non toxic, Pyrogen-free, valid for 5 years 3. OEM products available
Operation Instruction
1.Open the individual packing and take out the infusion set 2.Firmly close roller clamp 3.Insert plastic spike into container 4.Press drip chamber to fill half of it 5.Open roller clamp and expel air bubbles 6.Close roller clamp again 7.Apply needle into patients vein 8.Adjust flow rate by roller clamp 9.Open air inlet if use glass container and close the air inlet if use soft container 10.Dispose properly as medical waste after use
The Main Structure and Performance:
1. Product is made with Medical Grade Polyethylene, ABS, PVS, Nylon and other
Non-toxic materials
2. Product is consist of Spike cap, Spike, Drip chamber, Air filter, Solution Filter,
Tube, Controller, Y-Site, Connector and Needle.
3. The product and initial packaging are produced in the 100,000 class purified
clean workshops. Product is sterilized with E.O gas, valid for five years.
4. This product is sterile, pyrogen-free, no hemolytic reaction, no acute systemic
toxicity.
Cautions:
1. Check the batch number and validity before use.
2. Tighten the needle before use
3. It is strictly prohibited to use if the single packing damaged or needle cap
drop off.
4. For single use only, use immediately after unsealed, destroy after use. It is
