DC 12-24V Garage Door Receiver 433.92mhz, View Garage Door Receiver
| Product name | Gate opener | ||||
| Model No. | RK-RX01 | ||||
| Receiver Mode | superregeneration | ||||
| Parameter | specification | Unit | Condition | ||
| Min | Typ | Max | |||
| Frequency | 433.32 | 433.92 | 434.52 | MHz | |
| Receiver Sensitivity | -108 | dBm | |||
| Data Rate | Kbaud | ||||
| Supply Voltage.VDD | 10 | 12 | 14 | V | DC |
| Current | 15 | 15 | 15 | mA | |
| Operating Temperature | -10 | +65 | °C | ||
| Product name | Gate opener | ||||
| Model No. | RK-RX01 | ||||
| Receiver Mode | superheterodyne | ||||
| Parameter | specification | Unit | Condition | ||
| Min | Typ | Max | |||
| Frequency | × | 433.92 | 434.12 | MHz | |
| Receiver Sensitivity | -107 | dBm | |||
| Data Rate | Kbaud | ||||
| Supply Voltage.VDD | 10 | 12 | 14 | V | DC |
| Current | 15 | 15 | 15 | mA | |
| Operating Temperature | -40 | +65 | °C | ||
WORKING VOLTAGE: 6-24V
FREQUENCY: 433.92MHZ
LED:
1. When electrified, LED lights 1 second, it’s ready to work.
2. LEARNING CODE: press P1 (1 second at least), LED lights (1 second) and goes off( 1 second) and lights again, now press any button of the remote, if the code is learnt LED will go off. Then release the button of the remote. If the remote cannot read the signal, LED will light for 10 seconds and finish learning status.
3. PROGRAMMING METHOD:
A. press P1 one time, LED flashes one time and the first channel (monostable) activates.
B. press P1 twice, LED flashes twice and the second channel (monostable) activates.
C. press P1 three times, LED flashes three times and the first channel (bistable) activates.
D. press P1 four times, LED flashes four times and the second channel (bistable) activates.
Each channel can learn 140 codes at least.
It supports all the codes including fixed code and rolling code.
4. DELETING FUNCTION:
A. Delete one code: Press P2 for about 1 second and release, LED lights, press the button that you want to delete the code. Then it’s ok.
B. Delete all the codes: long press P2 for 8 seconds, LED lights, release your hand and LED goes off, now all the codes are deleted.
5. NOTICE:
A. since the data of rolling code is relatively bigger, it’ll take you a little more time to operate remote with rolling code than that with fixed code.
B. If you learning same code for more than one time, only the last code is memorized
Product Description
A. Feature
1. You can choose bistable (continuous ouput) or monostable( momentary output) directly when learning code with remote control.
2. The receiver is use-friendly. We can produce them with different code remote control as your request the receiver is widely used as motorcycle alarm receiver, electric vehicle alarm receiver, sliding gate receiver, auto gate receiver, sliding door receiver, rolling door receiver, ceiling fan receiver l etc
B. Technical parameters:
Momery code: 480 codes for 2 channels
Decode: Rolling code & Fixed code
Monostable mode and biastable mode: You can choose the mode you like when you learning code with remote control
Channel: 1,2 channel as your request
Receiver moule: Superheterodyne receiver moule
Output: +12V output. -12Voutput. Dry connect output
voltage: AC/DC12-24V
