Rubber Grinding Head Low and High Speed Grinding Head Tungsten Carbide Steel Diamond Burs Dental Drill Bur Tools for Dentist

Dental Diamond Bur:
1.Burs for rough wear. The thick-particle burs is used for mass operation.
2.Burs for fine wear. Burs is used for wearing and polishing surface of the prepared tooth.
3.Short shank diamonds For the opening of a smaller, particularly in the areas of the molar teeth preparation or fat pad in patients with abnormal hypertrophy of the molar teeth preparation area.
4.Long shank diamond points. For clinical crown longer gingival 1 / 3 prepared tooth area.
5.Shoulder burs. Such burs only in its design at the top end of dianmond particles for dressing the prepared tooth neck margin shoulder
6.Diamond burs with slender instrument and long, narrow neck Guarantee better exposure operation vision, dental prepared accurately to the deep dentin transition, ensure minimum damage to the teeth.

Description:
1. Made of natural diamond powder with high hardness to guarantee the sharpness of burs
2. The shanks are made of top-grade stainless steel, which are hard and tensile and don't break or bend easily or never rusty.
3. Use for cutting, polishing teeth or other mental or plastic materials
4. The diamond burs are consist of shank and working head .
5. The shank is made of stainless steel,the working head is electroplated with Nickel titanium and diamond grit .no sterilization.

Specification:
Type:TF-11,TF-12,TF-13,TF-14,TF-20,TF-21,TR-11,TR-12,TR-13,TR-14,T-19,TC-11,TC-21,TC-26,FO-11,FO-25,FO-27,FO-32,SF-11,SF-12,SO-20,SO-21,SR-11,SR-12,SR-13,EX-26,BR-41,SI-47,TR-11F,TC-11F,TC-21F .etc.
Size all size are available

Features:
1,Natural emery powder, high hardness, it can make sure bur sharpness.
2,Stalk who used high-grade stainless steel, high strength, no rusty.
3,It could be disinfected under the high temperature and high pressure.
4,The maximum allowable speed to 400,000/min.

Advantage:
1.Raw material selection: Use the high-strength, high-hardness stainless steel as the substrate of the burs.

2.The highly advanced high-speed CNC lathe was used to make the raw materials so that concentricity, varying diameters of the shanks won’t happen.

3.Use high-sharpness, high-hardness diamond as the raw material because it has a long service time, and it won't be painful for patients to use, and won’t damage the high-speed handpiece.

4.There are 5 types according to the sizes of diamond grits: standard type 106-125µ, slightly thin type 53-63µ, extra thin type 20-30µ, extra thick type, extremely thick type 150-180µ.