Bitumen water proofing membrane sbs/app modified bitumen waterproofing membrane granular mineral bitumen roof waterproofing

Product Overview

Description

Bitumen water proofing membrane sbs/app modified bitumen waterproofing membrane granular mineral bitumen roof waterproofing

 

 

Base materials	Modified Bitumen
Surface materials	Aluminum foil, PET, HDPE, etc
Release paper	PE film
Felt	1.0mm-4.5mm
Thickness	No felt or polyester
Width	1000mm
Length	10m-25m/roll

 

*The thickness, width and length can be made based on customers’requirments.

* Single side adhesive and double sides self adhesive can be made.

 

• Ensure that surfaces are prepared as above.


• Unroll the membrane and measure the correct length for the area to be adhesived.


• Allow the membrane to warm in the sun before application.


• Peel the release paper back from one end and press the membrane firmly onto the surface.


• Removing the backing membrane as you proceed.


• Press firmly onto the surface. The membrane must be overlapped at the edge by at least 5-8cm and on the top by at least 15cm.


• For a smooth finish, press membrane with a rubber hand roller, working from the center outwards, remove any air bubbles and creases ensuring firm contact is made with the surface.


• The aluminium foil backing must not be removed.