Cost Effective Concrete Metal Beams Formwork For Reinforcement With Long Guaranteed Warranty
- Category: >>>
- Supplier: Jiangxi Geto New Materials Corporation LimitedJiangxi Limited
Share on (60793935639):
Product Overview
Description
Cost Effective Concrete Metal Beams Formwork For Reinforcement With Long Guaranteed Warranty
Product Category
Product Description
Product detail
Comparison of different formwork system
Description | Timber Formwork | Light duty steel mould | Heavy duty steel formwork | Aluminium Formwork |
Formwork material | 12 - 18mm plywood | 2-3mm steel plate | 5-6mm steel plate | 4-8mm aluminium plate |
Formwork thickness | 12 - 18mm | 55mm | 80-85mm | 4mm |
Formwork weight | 10.5kg/sqm | 35-40kg/sqm | 80-85kg/sqm | 20-25kg/sqm |
Load Capacity | 30KN/sqm | 30KN/sqm | 60KN/sqm | 60KN/sqm |
Recycle use time | 5 | 100 | 250 | 300 |
Difficuty of work | Easy | Medium | Difficult | Easy |
Cost of maintanance | Low | Low | High | Low |
Construction efficiency | Slow | Slow | Fast | Fast |
Labour requirement | Need skillful carpenter | Skillful labour not required | Skillful and trained personal | Skillful labour not required |
Quality of concrete surface finishing | Rough surface, low quality | Rough surface better than timber | Good finishing | Good finishing |
Recovery value (Crap value) | Lowest | Low | Medium | High |
Heavey machinery requirement | None | None | Reruired full time | None |
Enviromental | Not enviromental friendly, produce conctruction waste. | Less construction waste | Enviroment friendly | Enviroment friendly |
Remark
This comparason made based on 30 floors of construction of high rise building and mass housing project which will use the formwork in regards of high repetition.
Product Advantages
Related Products
Our Company
Our Service
Logistics and Transp
FAQ
1.Q-:Can I use this set of formwork to another project?
A.Yes, there are nearly 70% standard panels can be common reused.
2.Q-:What's your packing methods?
A.Protection foam+heat contracted plastic film. / wooden packing(non-fumigation)/ Metal pallet or depend on clients special requirement.
3.Q-:What's your payment terms?
A.T/T 30% in advance & T/T 70% upon sending the copy of Bill of Lading, L/ C100%, or negotiate according to the order status.
4.Q-Are you manufacturer or trader?
A: GETO is the manufacturer of aluminum formwork system for 10 years. Our group as 4 factories, covering raged every scaffolding systems.
5.Q-:If I don't have construction crew knew well about your forwmork system, what can I do?
A.Well, we will send one or two field specialists to your construction site for guidance if you require.
6.Q-:Do you have pre-mocking up service?
A. Yes, we have pre-mocking up service, it depends on customer, sometimes, our clients need the cargo urgently, then they do not need pre-mocking up, normally,we will do pre-mocking up to our customers
7.Q-:How to proceed an order for aluminum formwork?
A.1- Please provide completed project drawings to us.
2- GETO designer will work out formwork solution base on project drawings.
3- Construction details confirmed, sign sales contract and receiving deposit.
4- To work out shell drawings and modulation drawings.
5- Have meeting for confirming formwork model details
6- Production.
7- Acceptance and check.8- Shipping
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
