CV Axle Shaft Constant Velocity Drive SEMI EIXO1.8L CVT ABS, BYD, G3,New F3/L3,G3R G3Q 2203010,G3Q 2203020
- Category: >>>
- Supplier: Yuhuan Kawa Machinery Factory
Share on (60799819093):
Product Overview
Description
Product Description
Description:A drive shaft, also known as propeller shaft or prop shaft, is a mechanical component used for transmitting torque and rotation from the engine/transmission to the wheels of a vehicle. It consists of a long metal tube that is responsible for transmitting power from the transmission or transfer case to the wheels. The primary function of the drive shaft is to transfer rotational power to the wheels while allowing for the wheels to move independently in response to uneven terrain. Without a functioning drive shaft, the wheels would not be able to turn and the vehicle would not be able to move.
The Driving shaft Axle also named as：
1. Drive shaft
2. Propeller shaft
3. Cardan shaft
4. Prop shaft
1. Drive shaft
2. Propeller shaft
3. Cardan shaft
4. Prop shaft
The Function of Drive Shaft:
The drive shaft, also known as propeller shaft or cardan shaft, is a mechanical component that connects the transmission or transfer case to the differential in a vehicle's drivetrain. Its main function is to transfer torque and rotational power from the transmission or transfer case to the differential, which in turn rotates the wheels and propels the vehicle forward. The drive shaft is composed of several components, including a tube, yokes, center support bearing, and universal joints, all of which work together to transmit power to the wheels. It's an essential component for proper functioning of a rear-wheel drive, all-wheel drive, or four-wheel drive vehicle.
The working condition of the Drive shaft Axle:
The automotive drive axle is also known as the half shaft, and its main function is to transfer torque and rotational power from the differential to the wheels. When the engine rotates the drive shaft, the power is transferred to the differential. The
differential then sends power through the drive axle to the wheels. In a front-wheel drive vehicle, the drive axle is inserted
into the transmission on one end and the wheel hub on the other end. In a rear-wheel drive vehicle, the drive axle connects the differential to the wheel hub. In both cases, the drive axle rotates at the same speed as the wheel, providing power to the wheels to move the vehicle forward. The drive axle consists of several components, including the axle shafts, CV joints, and boots, which protect the joints from dirt and debris. Proper maintenance is important to keep drive axles in good working condition.
differential then sends power through the drive axle to the wheels. In a front-wheel drive vehicle, the drive axle is inserted
into the transmission on one end and the wheel hub on the other end. In a rear-wheel drive vehicle, the drive axle connects the differential to the wheel hub. In both cases, the drive axle rotates at the same speed as the wheel, providing power to the wheels to move the vehicle forward. The drive axle consists of several components, including the axle shafts, CV joints, and boots, which protect the joints from dirt and debris. Proper maintenance is important to keep drive axles in good working condition.
Instalation
The installation steps for a drive shaft are as follows:
1. Check the components: Before installing the drive shaft, it is necessary to check the vehicle's components such as the
universal joint for completeness, ensure the fastening nuts are secure, and ensure the tires are properly fixed.
2. Install universal joint: Firstly, the universal joint needs to be installed properly onto the drive shaft, ensuring that it is correctly connected and secure.
3. Install the drive shaft: Install the drive shaft into the rear of the vehicle frame and secure it, usually with the correct size of nuts and bolts.
4. Adjust the drive shaft position: Ensure that the connection location between the drive shaft and the vehicle's engine and transmission system is correct.
5. Check and test: After installation, a meticulous check and a test must be performed before hitting the road, ensuring that it's firmly installed.
It is noteworthy that installing and adjusting a drive shaft requires professional skills and tools. It is recommended to find a
suitable vehicle maintenance professional to install it.
1. Check the components: Before installing the drive shaft, it is necessary to check the vehicle's components such as the
universal joint for completeness, ensure the fastening nuts are secure, and ensure the tires are properly fixed.
2. Install universal joint: Firstly, the universal joint needs to be installed properly onto the drive shaft, ensuring that it is correctly connected and secure.
3. Install the drive shaft: Install the drive shaft into the rear of the vehicle frame and secure it, usually with the correct size of nuts and bolts.
4. Adjust the drive shaft position: Ensure that the connection location between the drive shaft and the vehicle's engine and transmission system is correct.
5. Check and test: After installation, a meticulous check and a test must be performed before hitting the road, ensuring that it's firmly installed.
It is noteworthy that installing and adjusting a drive shaft requires professional skills and tools. It is recommended to find a
suitable vehicle maintenance professional to install it.
Overview
The Problem of the Drive shaft
Reasons for frequent failures of a car's drive shaft and repair steps.
Possible reasons for failure of the car's drive shaft are:
1. Wear and tear over time;
2. Rust in humid environments;
3. Deformation or breakage caused by strong collisions;
4. Loose bolts or significant deviations caused by improper installation.
If the car's drive shaft fails, the following repair steps can be taken:
1. Identify the problem. First, check the various components of the drive shaft to identify the specific location of the problem.
2. Disassemble the old drive shaft. Removing the drive shaft requires the use of professional tools, such as snap ring pliers and half-axle pullers, which can be done by a professional vehicle repair expert.
3. Install the new drive shaft. When installing the new drive shaft, pay attention to the following points: check whether the new drive shaft's model and length match the old one; apply oil or grease to ensure smooth rotation; fasten the drive shaft's fixing bolts in the correct order and with appropriate force.
4. Testing. After the installation is complete, the vehicle needs to undergo safety inspection to ensure that the assembly of components is correct, and perform road tests to ensure that there are no problems during normal driving.
Possible reasons for failure of the car's drive shaft are:
1. Wear and tear over time;
2. Rust in humid environments;
3. Deformation or breakage caused by strong collisions;
4. Loose bolts or significant deviations caused by improper installation.
If the car's drive shaft fails, the following repair steps can be taken:
1. Identify the problem. First, check the various components of the drive shaft to identify the specific location of the problem.
2. Disassemble the old drive shaft. Removing the drive shaft requires the use of professional tools, such as snap ring pliers and half-axle pullers, which can be done by a professional vehicle repair expert.
3. Install the new drive shaft. When installing the new drive shaft, pay attention to the following points: check whether the new drive shaft's model and length match the old one; apply oil or grease to ensure smooth rotation; fasten the drive shaft's fixing bolts in the correct order and with appropriate force.
4. Testing. After the installation is complete, the vehicle needs to undergo safety inspection to ensure that the assembly of components is correct, and perform road tests to ensure that there are no problems during normal driving.
In general, since the car's drive shaft is an important and complex transmission component, it is recommended to entrust this work
to professional vehicle repair experts. This can ensure your safety, as well as the long-term performance and life of the vehicle.
Recommend Products
Specification
item | value |
OE NO. | 44305TBCA51 |
Size | 26-23-645 |
Material | Steel |
Model Number | 44305TBCA51 |
Warranty | 1Months |
Brand Name | KAWACVJOINTS |
Place of Origin | China |
Car Make | Japan Cars |
Type | Drive shaft |
Packing & Delivery
PACKING: PACKING BOX IS SAME AS CLIENT'S BOX , EACH CV JOINT BE PACKED IN ONE BOX WITH REPAIR KITS, THEN 4 BOXES IN ONE CARTON
Company Profile
KAWACVJOINTS was established in 2003，which is a professional manufacturer of integrated automotive parts and accessories. We have our own brand named KAWACVJOINTS, We’re focus on expand to be the Industry benchmark.
Our factory has 8 forging production lines, such as 1600T, 1000T electric screw press, and the annual output of forgings is 15000T. It has a full set of advanced processing equipment, such as heat treatment, lathe processing and grinding processing. The annual output of universal joint assembly is 2 million sets. The company has passed
ISO9001 system certification, as well as TS16949 quality system certification, at the same time equipped with advanced testing equipment, to provide a strong guarantee for the quality of products. Adhering to the spirit of craftsman, focus on the production of auto parts, optimize the production capacity and sales, with "integrity, pragmatic, innovation,
development" as the purpose, with better quality products back to our customers, in a stable development.
Our factory has 8 forging production lines, such as 1600T, 1000T electric screw press, and the annual output of forgings is 15000T. It has a full set of advanced processing equipment, such as heat treatment, lathe processing and grinding processing. The annual output of universal joint assembly is 2 million sets. The company has passed
ISO9001 system certification, as well as TS16949 quality system certification, at the same time equipped with advanced testing equipment, to provide a strong guarantee for the quality of products. Adhering to the spirit of craftsman, focus on the production of auto parts, optimize the production capacity and sales, with "integrity, pragmatic, innovation,
development" as the purpose, with better quality products back to our customers, in a stable development.
Our Service
1. ODM/OEM Serives;
2. Goods Fast Delivery;
3. Factory Direct Quality & Price
4. Diversified Shipping Option
5. Mass Stock for Different Spare Parts Types.
2. Goods Fast Delivery;
3. Factory Direct Quality & Price
4. Diversified Shipping Option
5. Mass Stock for Different Spare Parts Types.
FAQ
1. who are we?
We are based in Zhejiang, China, start from 2016,sell to South America(20.00%),Central America(10.00%),Western Europe(10.00%),Southeast Asia(10.00%),Eastern Europe(10.00%),Mid East(10.00%),South Asia(5.00%),Domestic Market(5.00%),Southern Europe(5.00%),North America(5.00%),Eastern Asia(5.00%),Northern Europe(2.00%),Africa(2.00%),Oceania(1.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
CV JOINTS,CV AXLE,DRIVESHAFT,CV HALF SHAFT,CV BOOT
4. why should you buy from us not from other suppliers?
We covering cars in the Japanese cars (Toyota, Nissan, Honda, Mitsubishi, Mazda, Fuji, Daihatsu, Suzuki, Isuzu, etc.), the U.S. cars (GM, Ford, Chrysler, etc.), European cars (Volkswagen, Citroen - Peugeot, Fiat, Renault, Opel, Volvo, Alfa Romeo, Austin Ro
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES；
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese
We are based in Zhejiang, China, start from 2016,sell to South America(20.00%),Central America(10.00%),Western Europe(10.00%),Southeast Asia(10.00%),Eastern Europe(10.00%),Mid East(10.00%),South Asia(5.00%),Domestic Market(5.00%),Southern Europe(5.00%),North America(5.00%),Eastern Asia(5.00%),Northern Europe(2.00%),Africa(2.00%),Oceania(1.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
CV JOINTS,CV AXLE,DRIVESHAFT,CV HALF SHAFT,CV BOOT
4. why should you buy from us not from other suppliers?
We covering cars in the Japanese cars (Toyota, Nissan, Honda, Mitsubishi, Mazda, Fuji, Daihatsu, Suzuki, Isuzu, etc.), the U.S. cars (GM, Ford, Chrysler, etc.), European cars (Volkswagen, Citroen - Peugeot, Fiat, Renault, Opel, Volvo, Alfa Romeo, Austin Ro
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES；
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
