Raspberry Pi Raspberry Pi pcDuino Pure Copper Heatsink One Two Three Self adhesive Glue Raspberry Pi Accessories

Brand: Geek

Radiator use: graphics card

Radiator type: heat sink

Condition: New

Dimensions(mm): 14(L)X12(W)X5.5(H)

Weight Weight : 35 g

Uses: The use of memory for heat dissipation or other suitable heat dissipation.

Steps for usage:

1, check the size of the wafer, determine not less than the product size

2, remove the oil on the surface of the chip

3, remove the film at the bottom of the product

4. Stick the product to the center of the wafer

5. Press the heat sink for 1 to 2 minutes to make the heat sink and the chip bond well.

6. After moving or vibrating the machine, please check if the heat sink is completely attached to the wafer.

Precautions for use:

1. This product is designed for the heat dissipation of the memory particles. If it needs to be used for other heat dissipation purposes, please determine whether the size is suitable.

2. Please clean the stains, dust and oil on the surface of the IC before use, otherwise it may not stick well.

3. This product is a conductive metal. Do not touch the surrounding components during installation.

4. Purchase and install this product, please confirm that the product chip you use is not less than this product.

5. After moving or shaking the machine, please check whether the heat sink is completely attached to the wafer.