10Inch Aluminum Powered Subwoofer Enclosure 12V Slim Active Under Seat Car Subwoofer Box with Amplifier under seat subwoofer car

Features:

• 10" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub
• Enclosure is made out of cast aluminum which stays cool at all times
• Peak Power Handling: 400 Watts
• RMS Power Handling: 100 Watts
• Heavy Duty Mounting Feet
• PWM MOSFET Power Supply
• Low Level RCA Input
• High Level Inputs with Auto Turn-On Technology
• Adjustable Input Sensitivity
• Soft Delayed Remote Turn-On
• Thermal Protection Circuit, Short Protection Circuit
• Overload Protection Circuit
• Green Power/Red Protect LED
• Phase Switch: 0° or 180°
• Low Pass Filter: 50Hz - 150Hz
• Bass Boost: 0 - 12dB @ 45Hz
• Built in Subsonic Filter @ 20Hz
• THD: < 0.4%
• Subwoofer Level Remote Control

Specifications:

• Peak Power 300 Watts
• RMS Power: 100 Watts
• Impedance: 2 Ohm
• Dimensions (L x W X H): 345x245x70mm
• Frequency Response: 20Hz - 150Hz
• Signal to Noise Ratio: >90dB
• Sensitivity: 90dB @ 1w / 1m
• Input sensitivity, Low level: 300mV
• Input sensitivity, High level: 1.0V

Two Types of Installation Are Possible

Power Connections

1.Connect the ground terminal to the closest point on the chassis of the vehicle. Keep this ground wire to less than 39" (100 cm) in length. Use 8 gauge (or heavier) wire.

2.Connect the remote terminal to the remote output of head unit using 16 gauge ( or heavier ) wire.

3.Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8 gauge (or heavier) cable from this fuse to the amplifier location. Then connect the fuse holder to the "BATT+" (+12V) connection on the subwoofer rear panel.

1.Sample will be accepted as each size of 1-2pcs but paid, the customer will pay the courier freight as our cooperated DHL or FedEX.

2.The sample will be prepared at around 15-20days after get the sample order cost.

3.The sample prepare will be made as custom specification that negotiated.

 Gift Box Packing

1. OEM Manufacturing welcome: Product, Package... 

2. Sample order Acceptable

3. We will reply you for your inquiry in 24 hours.

4. After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.