Product Description
Product Description
Attic Stairway Insulator, Pull Down Attic Stairway insulation Cover
- [Comfortable Temperature] Our high quality Attic Cover is very effective at controlling excess heat during the summer and winter. Reflects 97% of radiant heat, Provides an R-Value of 14. 5.
- [Fire Resistant Material] Premium material protect your house from affecting by moisture or humidity. Make your life more comfortable and health.
- [Easy Installation] Installs in minutes, time saving. All instructions are included in the package.
- [Dipping Entrance] Our insulator was created with lower front opening that will allow your climb up and down to be much safer and easier.
- aluminum foil is very effective at creating an excellent thermal barrier, reflects 97% of radiant heat
- R-Value of 14.5
- Hight reflection, Low emissivity
- Protect from affecting by moisture or humidity
- Non-toxic, Non-carcinogenic
- Durable & Lightweight
HOW TO USE?
- Open your attic access then friction fit the attic access cover into place.
- Once in place, staple cover to the wood framing every 4-6 inches
- Continue former steps all tape is down and attic is sealed.Best results when air leaks are sealed.
- Air does not leak through the cover.
FAQ
Attic Stairway Insulator, 25" x 54" x 11" Pull Down Attic Stairway Iinsulation Cover R-Value of 14.5 Silver
Does it Installs easy and works?
Quality product and easy to install. Our thermostat to the hvac system is in hallway near attic door. Our system normally comes on and runs for 20+ min. Our hallway was always cold in winter and hot in the summer. Never paid much attention to the attic door and it’s cracks and seals. But recently I was working in the hallway and it was very cold outside. Our system came in and I could feel a constant cold draft of air. This brought our poorly sealed attic door to my attention. I began searching for products and made my decision to go with this one.
Installing the item was a easy 20 min job. It was like unfolding a cardboard box. I lined it up in place where I wanted it to be fastened. Staples it in place. Then I had some thin molding left over from interior windows so I used the stripes of molding to frame the edges to assist with making it more air tight. Seriously all of this took me 20 min. Only because my tools was strung out already in kitchen and rest of the house. Wife left the country for the holidays so I’ve been slow to clean up. Oh well anyway. Shortly later my system came on and for the first time in 3 years it was on and then off in less than 5 min. I was not able to locate a drafty at all. I love the dual zipper as it opens easily like a tent door.
Insulating stair cover is a piece of the puzzle of weatherizing your home. It slows air transfer from your attic to your home, and stops insulation from falling into your home when the attic is accessed. Fits most openings up to 25"x54". We manufacturer this cover a few inches larger than needed to accommodate building tolerances. If your opening is too small, simply fold the edge over and staple for an airtight seal. Easy access to your attic with a zipper. Easy to install, all you need is a staple gun. You can use caulk around the edges for an extra seal if you like, but its not necessary. Fits most openings up to 25"x54". We manufacturer this cover a few inches larger than needed to accommodate building tolerances. If your opening is too small, simply fold the edge over and staple for an airtight seal.