100mm abs reflective plastic reflector road stud

Product Description:

Our Plastic Road Stud  has been designed and manufactured to withstand particular difficult environmental and traffic conditions. The high intensity ABS used is one of those offering maximum compression resistances to vehicular traffic and to spread the impact load over the pavement surface. Reflective lenses use PMMA imported from Japan. Strong compression resistance, greater than 160KN. Strong reflective, good water-resistance and push-resistance. The reflective Plastic Road Studs are particularly suitable for roads with heavy traffic. 

Brand	NYH
HS Code	3926909090
Shell Material	ABS
Lens Material	PMMA
Photometric values	Exceeds 1200 (mcd/lux)
Weight	240g
Packaging	10Opcs/ctn
Carton	43.5x24.5x19.5cm
Color	Red/White/Yellow/ Green/ Blue
Loading	More than 16 tons

Features:
1、Strong compression resistance, shock resistance, high temperature resistance.
2、Strong reflective effect, warning vehicles in the night obviously.
3、Various colors make the road beautiful.
4、Very easy to install. 
Functions:
Fixed on the road surface to mark the center line, lane line, etc, and make the marking line brightly.

Application:

1.Lane delineation.

2.Lane marking and guidance.

3.Lane merging and on / off ramps. 

4.Accident prevention at black spots. 

5.Hazardous road layouts. 

6.Cycle path delineation.

7.Cycle route way finding.

8.Architectural.

9.Square, Villa, Garden, Street, Pathway, Landscape.

Installation Procedure:

1. Mix the glue.

2.Installation position must be flat ,dry ,clean ,seamless.

3.Using proper quantity glue, stuck the road stud on the ground, after installation, turn it left and right once again to ensure it paste on the road uniformly and firmly.

4. Must be 6 hours of road closures to ensure the glue solidified.