two component polyurethane of Epoxy resin for Transformer in Electric Insulations

1.Excellent tensile strength and high elasticity,well-adapted to the substrate shrinkage and deformation.

2.Easy to apply, and shorten the construction period.

3.It is safe and environment friendly , tasteless , non-toxic.

4.Oil-based,single component,resistance to aging,UV and corrosion.

1.Substrate should be clean , you can brush a little water to keep surface moist ,easy to construction
2.Brush directly after stirring the material evenly .(If the waterproof coating is too dense , you can add water. )
3.Brush the coating by 3 or 4 times ,and recommend that the thickness should be not beyond 0.7mm at per coating film.
1.0mm ≤the total thickness ≤2.0mm.After the first layer is curing ,(interval time : 12h-24h)do the second layer ,And the second should be at right angle to the first layer.
4.If necessary,do the protection layer after the coating is cured.