Enzyme used for Algae seaweed breaking down liquid seaweed fertilizer used enzyme

Product Overview

Description

For more details ,pls contact with me directly .

Brand

YUEXIANG

The compound enzyme use instructions:
The fully crushed substrate is uniformly placed in a 1:5-1:8 water bath, and the pH of the water bath is adjusted to 4.0-5.0 with an acid (such as oxalic acid, acetic acid, citric acid, etc.) in accordance with the relevant grade, and then calculated. A good ratio of the preparation into the water bath, stir well, the following factors may have a great impact on the use of the effect, please give the user to determine after a full experiment.
1. The pH of the water bath and the effective range of pH are: 4.0-5.0, the best value 4.8
2, temperature: water bath temperature is effective between 15 °C and 62 °C, the optimum temperature is 50 °C, below 50 °C, it is necessary to extend the action time at room temperature for 10-24 hours, generally can achieve the effect, if you want to shorten Time needs to be used in increments.
3. Stirring: Properly stirring the water bath is beneficial to the hydrolysis of the enzyme. If it is stirred once every 5 minutes, the treatment time of 1/2 can be shortened.
4, the degree of fragmentation: In general, the higher the degree of substrate fragmentation, the more obvious the effect.
5. Adding amount: When the marine plant is used as a substrate, the dosage of the preparation is 0.8-3% of the substrate.
6. Expectation of effect: After using it in the correct way, the extraction rate will generally increase by more than 15%. If this effect is not achieved, please contact our company or local agent.