CE Approved Waste Rebar Straightening Machine Scrap Rebar Straightener Scrap Steel Bar Machine

Product Description:

Rebar Straightening Machine is one of steel processing machinery. Used to straighten and cut off the diameter of less than or equal to 14 mm of steel, and rust. By the straight cylinder, holding body, cut off institutions, steel fixed-length frame, rack and drive structure and other components.

Its working principle as shown in the figure, by the motor through the belt drive growth, so that the straight high-speed rotation, through the straightening of the steel bar straightened by the straightening mold to remove the steel surface rust; by the motor through another pair Deceleration belt drive and gear box, on the one hand drive two transmission pressure roller, traction steel forward movement, on the other hand drive the crank wheel, so that the hammer up and down movement. When the steel bar is adjusted to the predetermined length, the hammer hammers the tool rest, cuts the steel bar, and cuts the steel bar into the receiving frame, the knife table returns to its original position and completes a cycle.

Applicable to construction engineering, highway, bridge engineering and concrete components, prefabricated board straight disk circle and straightening of the use of waste steel straightening.

Features:

1. New movement cone-oriented devices,scrap steel does not play section,not stuck,go out more smoothly.

2.Entrance anti-rejection and anti-hook design,bending steel easier to enter.

3.Professional sharp steel cut-off device,easy to cut,more durable.

4.More reasonable inlet&outlet assembly design,adjustment is more convenient.

5.Improved globle detail design, sound smaller,lower energy consumption,easier operation.

6.Applicable to 4-12mm waste steel straightening.

Technical Parameters:

‍