SD6341 epoxy potting compound electronic potting compound silicone compound

Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

1. Cleaning the surface of the adhered or coated object to remove rust, dust and oil.

2. Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.

3. Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

1.Keep thermal paste out of reach of children.

2.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly  or indirectly resulting from the use of, or inability to use, the product. Recommendations or          statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

 Huizhou  SANDAO New Material Co., Ltd, manufacturer founded in 2004 , with Headquarter  in Shenzhen and factory in Huizhou, Guangdong. We specialized in producing adhesive and  sealant for 14 years. Main products including thermal conductive gel adhesive,  heat conductive grease,  RTV sicicone rubber, glass glue, expoxy resin AB glue, UV glue ,  anaerobe etc.

Our products are widely used in LED display products, high-tech semiconductors, electronics, electrical appliances, optoelectronic display, optics, toys, solar photovoltaic modules, power modules, automotive, mechanical, metal, aviation, construction and other industries.

Our company has 2 production departments, laboratory and testing centers, 2 branch factories, equipped with perfect product testing equipment, such as gas chromatograph, particle size meter, thermal conductivity meter, pressure tester, etc. Infrared spectrometer, electron microscope, X-ray fluorescence spectrometer (ROHS detector) and hot impact test box, aging resistance constant temperature oven, etc.

As a national new and high-tech enterprise,  we are aimed to offer customers high quality products which is safe and healthy. All our products meet  the requirements of ROHS, REACH and UL. Thanks to our strong R&D team ,we developed wide range of product series which cover more than 150 items. 

We have 2 Sub-plants with an annual output of 5000 tons. So the delivery time is very fast, normally within a week. Many items are in stock.  Now Sandao customers are from all over the world, we’re continuous upgrading our sweet service.

SANDAO, Trustworthy!

 why choose Sandao ?

   14 years experience in adhesive and sealant industry. 100% professional!

     Raw material carefully chosen from listed company. Safe & healthy!

     Advanced production and testing equipment. High quality!   

     Strong R&D team offer independent R & D science and technology .High tech!

     ISO9001:2008 UL. RoHS, Reach approved.  Quality control!

     2 Sub-plants with an annual output of 5000 tons. Fast delivery!

     7*24h fast response for customers all over the world. Sweet service!