COP Series Cooking Oil Purifier is designed for purifying fry oil, cooking oil, vegetable oil, swill-cooked oil, palm oil, rapeseed oil, sunflower seed oil, olive oil, peanut oil, coconut oil, etc.
COP Series Cooking Oil Purifier can effectively remove water, gas, grease, impurities particulate matters, air, volatile matter (for example ethyl alcohol, gasoline, ammonia) and other contaminants from oil, and strongly demulsify, by which to reduce oil's water content and impurity content, improve oil cleanness.
So after the treatment by the machine, a new fresh oil come into being, and the previous used cooking oil/vegetable oil will become limpidity, and fresh quality, and has good quality to produce other products, such as biodiesel, soaps, and so on.
This machine consists of electric heating system, vacuum evaporation system, multi-stage filtration
system etc. If the oil is for edible food, it can be made of stainless steel type.
1. Double primary filters structure, three-stage filtration system (primary filter, secondary filter, fine filter) with gradually increasing filtration precision, removing impurities as much as possible.
2. Large area three-dimensional flash distillation technology, removing gas and water efficiently.
3. Strong ability of demulsification, separating oil and water efficiently.
4. Humanized design, all necessary control buttons and indicator lights are equipped on the control panel which provides easy control for operation and supervision.
5. High-efficiency electric heating system, controlled by automatic constant temperature controller, heating the oil uniformity, avoiding oil deterioration, less power consumption.
6. Equipped with double-infrared oil level controller: During the running of the machine, it will control the oil pump start and stop automatically, ensuring the balance between oil inlet and outlet.
7. Equipped with pressure controller: During the running of the machine, if the working pressure exceed the setting value, the machine will stop running automatically.
8. Equipped with emergency stop switch: During the running of the machine, if there has any emergency situation, the machine will stop running immediately.
9. Interlocking protection mechanism, connecting vacuum pump and heater, avoiding blank pumping, blank heating, safe and reliable.
When COP starts working, oil will be sucked into heater by vacuum pressure, then the oil will be heated and flow into primary filter, where the big impurities are separated.
Then, oil flows into vacuum separator, and flows through a special designed device, which makes per unit volume oil to produce a large surface area, lets the oil exposure in low humidity atmosphere, so the gas and water are separated from oil.
The gas and separated water vapour forms as mixed gas, flows through water tank and cooler, condense into liquid and flows into water receiver, the residual gas is exhausted by vacuum pump.
Oil flows through oil pump and into fine filter, where the tiny impurities are separated.
If the oil is very dirty, or is high water content etc., you can purify the oil circularly for several times, by which to remove the water and impurities completely.
For more details, please refer to the Flow Chart, Structure Chart, Circuit Diagram etc.
||-0.06 ~ -0.095
||0 ~ 100
||380V/ 50HZ/ 3P (as per request)
|Oil After Treatment
||NAS 1638 Class 5 - 7
Note: This table is for reference only, the actual machine is the standard.
For insulating oil purification and regeneration
1.ZY series for purify the insulating oil (for less than 110kv transforer oil purification or other insulating equipment oil)
2. ZYB series for purify and regenerate the insulating oil (for less than 110kv transformer oil purification and regeneration)
3. ZYD series for purify the insulating oil with a roots pump (for over 110kv transformer oil purification)
4. ZYD-I series for purify and regenerate the insulating oil (for high voltage insulating equipment oil purification and regeneration)
For lubricating/turbine oil purification and regeneration
1.TY series for purify the turbine oil (Mainly on dehydration, demulsification)
2.TYA series for purify the normal lubricating oil
3.TYC series for purify and regenerate the normal lubricating oil
TYB series without Vacuum system (deal with the dirty oil which can not be heated, and for the light oil)
LY series plate pressure oil purifier (remove the particals from the oil, can purify the vegetable oil when use SS material)
JL portable oil purifier ( it's economic with three-stage purification. remove impurities from the dirty oil, best for oil filling and oil drawing)
BOD series oil purifier ( purify the dirty black oil to normal color, over 90% oil yield)
BDV tester for insulating oil
For more information, please feel free to contact us.
Chongqing Zhongneng Oil Purifier Manufacture Co., Ltd is a leading oil purifier manufacturer in China, which engages in developing, producing, selling a series of oil purifier such as transformer oil purifier, turbine oil purifier, engine oil purifier, lube oil purifier and so on. We practice in this line for fifteen years, so we have a strong technology and gain rich experience. Our products have been exported to many countries, and get a high reputation.
We provide free services,such as:
1)Engineer overseas service
2)Maintenance and replacement service, when it is necessary
3)tracking service for products for 12 months,lifetime service
4)lifetime technical assistant service
5)old customer has more discount ,or the customer introduce others to us,which has more discount
(1)100% brand new,we take 12months to 24 monthy year(any of the damage caused by buyer shall not be the seller responsibility) quality guaranty.
Packaging & Shipping
Standard Export Wooden Case