GXK Roller Washing Machine
Sand washer is a large-scale equipment used in black and non-ferrous metallurgical mines, iron and steel, metallurgy, chemical industry, building materials to clean ores and stones. Sand washer processing capacity is relatively large, which is an ideal equipment for enterprises that meet the requirements of high productivity for the cleanliness of ores and stones. Washing can avoid the mud in the muddy mineral raw materials clogging the crushing and screening equipment, raw materials such as soluble and useful or harmful ingredients also need to be washed.
1. Strong adaptability and no pollution. Feeding particle size is 1 -300mm, with strong adaptability.Rubber lining, wear-resistant and pollution-free.
2. It is equipped with secondary high-pressure cleaning device , which makes the more thorough cleaning and higher efficient.
3. The entire equipment structure is simple and reasonable, easy to operate, low failure rate, and easy maintenance.
4. Energy-saving and environmental protection without pollution, can be equipped with a sewage treatment system according to customer requirements.
The cleaning cylinder is supported by four tugs, the motor drives the reducer, and the big and small gears drive the cleaning cylinder to rotate at low speed. Aggregates containing mud and stone powder are fed into the rotating drum from the inlet port. A wear-resistant rubber liner with a certain angle is installed in the cleaning drum, which is continuously lifted and thrown down. It circulates many times during the movement from the feed end to the discharge end, and is washed by flushing water in the direction or in the opposite direction. The clean aggregates are discharged after sieving and dewatering by the discharge end drum. Wastewater containing sludge is discharged through the orifice baffle at the discharging or feeding end.
|Capacity (t/h)||Feed size|
|Water consumption (m³/h)|
1 Packaging: Specially made wooden boxes and containers
2 Shipping: 5-45 days after receiving initial payment
Based on customers’ request, the technicians will design drawing and final solution. Mostly, Welcome to visit tour factory, tickets, hotels, food and local tour are provided for every visiting customer.
One or more engineers will be sent to the quarry site for installment and training. If any problem happen during use technicians guidance is available by internet or phone.