Scooter Moped Go Kart Dune Buggy 250CC driven clutch atv hydraulic clutch atv clutch kit

For the first time driver, first understand the ATV brakes, throttles, gears, clutch positions and operating forces to be driven. Also check if the tire screws are loose and the wheels are loose and skewed; the air pressure of the tires is suitable.

Every necessary safety check should be carried out before each vehicle to ensure that each machine is flexible and effective.

Safety equipment, helmets and protective clothing are required before riding. Since there are many versions of ATV, different versions have different protections.

Master the correct driving posture. The soles of the feet are stepped on the ankles, the toes are forward, and the fuel tank is clamped on both knees; the palms are down, and the handlebars are lightly gripped like a forward cart; the whole body is naturally relaxed and the eyes are looking straight ahead. Always pay attention to the situation on the road ahead.

During riding:

At low speed, cut the direction handle to the direction of turning, the upper body is slightly forward, the feet are steady, the weight is placed on the outer pedal, the upper body is balanced, and the throttle is kept at a constant speed. At high speeds, the basic operation is the same as turning at low speeds. The difference is that in order to achieve balance and greater centrifugal force, the movement of the upper body must also increase.

When going uphill, the two feet should be stepped on the pedal in the field, and after the gear is determined, accelerate before climbing. When climbing a small angle, the body should be slid in front of the seat to move the center of gravity forward.

When the slope is steep, try to move the center of gravity to the front, and depending on the occasion, stand on the pedal and bend the body forward to move the center of gravity to the front wheel.

When stopping on the way to climb, quickly press the front wheel brake first, then press the rear wheel brake and the parking brake, that is, brake first, then rear brake. The opposite is true when going downhill.

Be sure to slow down when steering, to prevent side slip. At the same time, make good use of the movement of the center of gravity of the body to make up for the lack of the angle of the ATM steering, making the exiting movement more rapid and smooth.

In the bumpy position, you can use the standing driving posture, which is more conducive to maintaining the balance of the body and better passing the bad road surface. This is also the biggest feature of driving ATV.

During the ride, there is no special situation to avoid sudden stop or slow down to prevent unexpected events; when overtaking, be sure to turn on the turn signal to ensure safe overtaking, do not cling to the vehicle being overtaken.

At night, because of the short visual distance, you must slow down and turn on the night driving lights to attract the attention of pedestrians and vehicles.

When you feel that the car is abnormal during driving, be sure to stop and check.

After parking:

Check the lights and electrical appliances for abnormalities; see if there is any oil leakage or abnormal sound in the engine.

Turn off the circuit, lock the car; turn off the fuel tank switch.