Aeropak Conforming Coat is one component light yellow transperent liquid, made from epoxy resein and other polymer elastic components. Aeropak Conforming Coating Spray has strong adhesion and small stress. Its dry film produces no free-radical and has no corrosion to electrical components. The paint film is heat resistant up to 130℃,when it will be soft but will not drop and thus has no harm to insulation of paint film. The product has good stability to acid, alkali, salt and other chemicals, and has excellent performance in moisture proof, insulation, electricity leakage proof, shock proof, dust proof, corrosion proof, aging proof, corona proof, etc.
Product Description
1. Usage:
It is widely used in hybrid integrated circuit, automotive electronic control board, electronic circuit board, aviation instrumentation, soft printed circuit board, computer control board, industrial control board, semiconductor crystal line protection, home appliance controller, and other electronic parts.
2. Directioins:
1. Cleaning-Before spray, clean the surface from any dirt, water, oil, grease, etc, and dry.
2. Covering-Cover the places need no spray, especially places of linker, socket, switch, plug board that allows no coating.
3. Pay attention to the thickness of layer, dont spray too much onto one place.
4. Operating-Shake the can well before use, and keep the can 15-30cm from surface to spray.
5. Repairing-To repair components covered with Aeropak Conforming Coating, just simply remove the coating by using a electrocautery to touch the coated part, then install the new component, clean the area with a brush, and after dry, spray the Aeropak Conforming Coating again to cover it.
3. Precautions:
1. Use in well ventilated place. Keep away from any sources of flame or heat.
2. Clean the PCB or components from any dirt, grease, water, oil, etc.
3. Dehumidify the PCB first in any moistured weather
4. Notices:
Use in a well ventilated dry area.
Ensure the can is at room temperature before use.
Do not apply in temperatures below 10 degrees.
Do not apply in a raining or wet weather.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
Use only outdoors or in a well ventilated area. Wear protective gloves/clothing/eye/face protection.
IF ON SKIN: wash with plenty of water.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing.
If eye irritation persists: Get medical advice/affection. Protect from sunlight.
Do not expose to temperatures exceeding 50 ℃/122°F.
Dispose of contents/container to as per local and national regulations.
KEEP OUT OF REACH OF CHILDREN.
Packaging & Shipping
Item name
Conformal Coating Spray
Can size
65mm*195mm
Package
500ml*12pcs/ctn
Carton size
275X205X245mm
If shipped by LCL, we will pack all the goods onto pallet, and wrap with plastic film to protect the goods safe in transportation, and make sure you will receive the ordered quantity of goods (will not get loss of the goods)
For Full container loading, we will ship only by DG cargo container ( UN1950, IMO 2), and will put a net at the back of container to prevent goods drop down and hit workers on the ground.
Company Information
OUR COMPANY
OUR EXHIBITIONS
OUR SERVICES
Our competitive edge over other suppliers is that we offer solutions rather than supplying goods and services. We provide an excellent combination between prices, quality & responsibility.
Our Products
Our company specialized in the following products:
