Share on (62012880956):
ENTEGRE MOULDING PLASTER
Gypsum Plaster
APPLICATION FIELD
It is used in casting of requested models for decorative purposed and mounting of decorative gypsum plaster product to wall. It is also used in repair, restoration and renewal in housing and business places thanks to early freezing quality.
REQUIREMENTS
Taking shape in mould
Breathability
Light and durable
APPLICATION
SURFACE PREPARING
The surface should be free from adherence reducing substances. If necessary,application surface should be moisten with water before application.
MORTAR PREPARING AND APPLICATION
First water is put into mixing bowl, then ENTEGRE MOULDING PLASTER (7 lt water/ 10 kg in product ratio) is spread until all water surface is lined. 2-3 minutes should be waited for plaster to absorb water and the product is mixed with hand or mixer until being homogeneous. After mixing, mortar is ready to use.
Mold is lubricated with mold oil in order to remove gypsum plasters and remove the mold easily. ENTEGRE MOULDING PLASTER is waited to freeze. Completely frozen plaster is removed from the mold.
CONSUMPTION
For 1 mm thickness, 1,0 kg/m²
TECHNICAL VALUES
Water Value 70/100
Bending Strength, N/mm² ≥ 3,0
Compressive Strength, N/mm² ≥ 10,0
Spread , mm 190 - 200
Set Beginning Time, minute ≥ 8
Set Ending Time, minute ≤ 30
Reaction to Fire A1
PACKAGING AND STORING
• It can be delivered in 30 kg in PP bags or as pallet if requested.
• It is recommended to be consumed that within 6 months from the production date and within 1 week after the bag has been opened, provided that it is put in a maximum of 8 rows in its original package without being opened in a dry and frost-free environment.
WARNINGS
• No foreign substance (lime, cement, gypsum etc.) should be added in the prepared mortar.
• Mould should be dry and clean before application.
• Tools used in mixing and mixing water should be clean.
• High speed mechanical mixer affects consumption and setting time of the product.
• Application is recommended to be done
at a temperature of +5 °C degrees to +30 °C degrees.
• ENTEGRE MOULDING PLASTER should be protected against rapid drying in windy weather.
• Comply with the specified application area and operating instructions.
• Do not breathe directly. In case of contact with eyes, wash eyes with plenty of water, if needed, seek medical advice.
• Please request the safety data sheet for more information.
• Please consult us for all other application conditions and technical questions