EMS: “Electrical Muscle Stimulation” is an internationally accepted and proven way of treating muscular injuries. It works by sending electronic pulses to the muscle needing treatment; this causes the muscle to exercise passively. When the muscle receives this signal it contracts as if the brain has sent the signal itself. As the signal strength increases, the muscle flexes as in physical exercise. Then when the pulse ceases, the muscle relaxes and the cycle starts over again, (Stimulation, Contraction and Relaxation.)
Comfy EMSEV - 805 – The Most Popular Muscle Stimulator with 3 EMS Modes!!
The Comfy EMSEV-805 features 2 Channel, 3 EMS Stimulation Modes. With adjustable pulse width, pulse rate, intensity, ramp time and treatment time, users could easily operate their treatment and customize the most comfortable setting for themselves. With large Liquid Crystal Display, it clearly shows the selected mode and the treatment remaining time.
For the purpose of pain relief and muscle strengthening, Comfy EMS EV-805 is definitely an ideal for the users to start their first electrotherapy treatment.
*510K approved for OTC use and safety regulations (IEC60601-1, IEC60601-1-2 EMC) certified. Made in Taiwan.
*No prescription needed. Safe, All-Natural, Drug Free and Long-Lasting Pain Relief
Key Features
3 EMS Modes: Constant, Synchronous and Alternate
Constant: Constant stimulation based on setting value. Only pulse width, pulse rate and timer are
adjustable in this mode. “Constant” is equal to the “Normal” mode of a TENS unit.
Synchronous: Stimulation of both channels occurs synchronously
Alternate: The stimulation of the CH2 will occur after the 1st contraction of CH1 is completed.
Specifications
Model Name
COMFY EMS EV-805
Channel
2 Channels
Amplitude
Adjustable, 0-100mA peak (500 ohm load)
Size
10.1cm (L) x 6.1cm (W) x 2.45cm (H)
Weight
150 grams ( Battery included)
Wave Form
Asymmetrical Rectangular Biphasic Pulse
Pulse Rate
2~150 Hz, 1Hz / Step
Pulse Width
50~300 microseconds, 10 us / step
Timer
0~90 seconds, 1Sec./ step
Compliance Meter
60 sets of individual operation records
Stimulation Type
EMS
Modes
Constant, Synchronous, Alternate
Charging Type
9V Battery
Tolerance of Settings
± 5%
Tolerance of Output
± 20%
Company Information
Everyway Medical, based in Taiwan, was established in 1991. Our company has been in the medical field for nearly 30 years and we are approved by ISO 13485, CE, and DNV. Our main products are TENS, EMS, Electrode Pads, Probes, Conductive Garments, Treatment Tables and Traction Systems. All of our products are exported to the USA, Europe, Australia, the Middle East, UK and other 70 countries.
The strict quality control system was implemented in each link from materials entering, production to finished product leaving plant, which could guarantee the quality effectively.
The objective of EVERYWAY MEDICAL is to make people live a healthier life and embrace the world without pain. We’ll make every effort to manufacture meticulously, blaze new trails constantly, and provide the best products and service to our every partner.
Other Products from Everyway Medical:
Everyway Medical has been dedicated to the product development and innovation. In order to reduce the lead time of the production and maintain the quality, we implemented automatic control for the electrodes production and assembling, for our TENS and EMS units, we adopted one stop production line to reduce the production lead time.
Certifications
Trade Show
Buyer Feedback
FAQ
Q: Are you a manufacturer or a trading company?
A: We’re a manufacturer based in Taiwan.
Q: What’s your average lead time of production?
A: For standard order, the lead time would be around 2 weeks because our factory’s policy is "make-to-order"(MTO).
Q:Do you have MOQ policy ?
A: Yes, we have different MOQ for different categories as following.
TENS/EMS - 20/32 sets based on different models
Probe : 100 sets
Conductive Garment :100 sets
Electrode Pad : 400 packs
Treatment Table : 1 set
Traction Unit : 1 set
Lead Wires : 200 packs
Q:How do you assure the product quality?
A: Our company has been in the medical field for nearly 30 years and we are ISO 13485, CE approved. Moreover, we have three steps of quality checkpoints before we ship the goods.
Q: Do you attend any medical trade show?
A: Yes, we would attend MEDICA in Dusseldorf, Germany every year and our booth number is 5D/38. Feel free to meet us there.
