Far Infrared 12K Silicon carbon fiber Heating Wire

Share on:


Price:RUB 15.34
Price in USD:Details

Quantity:


Product Overview

Description

part1_.jpg

Model36K24K18K15K12K9K6K3K
Resistance Ω/m10.51722.525334266133
Wire Diameter mm3.23.02.82.52.22.01.81.5

 

Product Model: 24K carbon fiber heating cable

        Working voltage: 220V                               

        Insulation strength: >500 megohms
        Product model: 24k                                   

        Outer layer protection: high temperature resistant PVC layer
        Product specifications: 12.5m per group   

        Temperature resistance temperature: 280 degrees
        Product power: 230w per group                 

        Wire diameter: 5.5mm

Specification

Power(W)

Laying area

2 roots / group

460

3

3 roots / group

6904.5

4 roots / group

9206

5 roots / group

11507.5

6 roots / group

13809

7 roots / group

161010.5

8 roots / group

184012

9 roots / group

207013.5

10 roots / group

230015

11 roots / group

253016.5

12 roots / group

276018

13 roots / group

299019.5

14 roots / group

322021

 

part2.jpg

 

1.K represents the meaning of thousands?

1K is a thousand silk, 24K is 24 thousand silk (24000) composition

Different K numbers represent different resistorsl

 

2.The difference between silicone and PTFE

PTFE/PFA/FEP carbon fiber heating wire

Advantages: Wear, corrosion resistance, no smell

Disadvantages: Relative to the silicone are not soft

Silicone carbon fiber heating wire

Advantages: Resistant to bending, soft

Disadvantages: There is smell

 

11676539258_290772436_.jpg

 

3.What is the resistance per meter?

1K=400Ohm/m, 2K=220Om/m, 3K=133hm/m, 6K=74Ohm/m, 9K=43Ohm/m, 12K=33Ohm/m, 15K=24Om/m, 18K=21Ohm/m, 24K=17Ohm/m, 36K=12Ohm/m, 48K=9Ohm/m

 

4.How to calculated power

Product power calculation:

(Voltage*Voltage)÷(resistance*length)=power

The longer the length, the smaller the power of the heating line

Precautions

The heating wire can not overlap when used! Can not cross!

Cross-over will make the heating line local temperature higher than the melting point of the protective layer, will damage the heating wire!

 

5.About installation

The normal laying power is 100-160 watts per square. Different areas can be increased or decreased according to the room's own insulation and the type of floor. The installation is very simple, we will guide the installation, the normal laying distance is 12cm.

 

6.Precautions
The carbon fiber heating wires must not cross between each other during installation and should not be touched with each other. After installation, wait until the concrete floor is fully dried and then heat to prevent the floor from being cracked and twisted due to excessive temperature rise. When using the floor heating for a long time, set the minimum temperature first, then slowly heat up for the same reason.

 

5.jpg_.jpgpart3-2.jpg

 

PART6.jpg

 anne.jpg

 

0.0178 s.