Share on (62024021785):
| Model | TS-PEC-002 |
| Electrical Properties | |
| Voltage | 230V AC±10%/380V AC±10% |
| Max Output Current | 16A/32A(6/8/10/13/16/20/32A adjust) |
| Max Output Power | 3.5KW/7KW/11KW/22KW |
| Frequency | 50/60Hz |
| Residual current protection | 30mA as default 6mA is optional |
| Structure Design | |
| Display | 1.8'LCD |
| LED Indicator | LED Light bar |
| Front Panel | PMMA |
| Installation Method | Wall-mount/carry-on Optional |
| Charging Outlet | Typel/2+4.5M charging cable |
| Power incoming line | 0.7M |
| Total cable length | >5M |
| Housing Material | PC+GF10% |
| Security Protection | |
| Safety Standard | IEC/EN 61000-6-1:2019;EN61000-6-3:2007+A1;IEC61000-6-1:2016; IEC61000-6-3:2006+A1;CISPR14-1:2016;IEC/EN 62752:2016+A1 |
| Multiple Protection | Over/Under voltage protection, Surge protection, Over temperature protection,Over current protection, Leakage Protection,Short circuit protection,EFT Protection |
| Warranty | 1 year |
| Environmental Performance | |
| Working temperature | -30℃~+50℃ |
| Working humidity | 5%-95%,No condensation |
| Protection Level(control box) | IP65 |
| Altitude | ≤2000m |
| Application Site | Indoor/Outdoor |
| Cooling Method | Natural cooling |
| Extra Function | |
| Temperature detection function | Yes (check the temp.of PCB and show it on the screen) |
| Schedule charging | Yes(1-8hours) |
| Packing Details | |
| Product Size | 255*109*55mm |





Teison's portable ev chargers are splash, water and dust resistant and have been tested under strictly controlled laboratory conditions to achieve an IP65 rating in accordance with IEC standard 62196. However, the resistance to splashes, water and dust is not permanent and may weaken over time under normal use. Damage caused by liquids is not covered by the warranty.
To prevent damage to your charger from liquids, please avoid the following situations :
1. Exposing the charger to pressurised water or high velocity water flow.
2. Intentionally submerging the charger in water.
3.Operating the charger beyond the recommended temperature range or in extremely humid environments
4. Dropping the charger or subjecting it to other shocks.
5. Disassemble the charger, including removing the screws.
If the charger comes into contact with liquid, turn off all power until it is completely dry.
Placing the unit in front of a fan so that cold air is blowing directly on the charging connector may help to speed up the drying process.
Do not use an external heat source to dry the charger, or insert foreign objects such as cotton swabs or paper towels into the charging port.


New products from manufacturers at wholesale prices