IP68 underwater pinpointer gold coin hunter mini pointer metal detector

Waterproof metal detector Gold Hunter TM is dedicated for use as a hand-held metal detector to assist in the soil searching, but its universal design and capabilities make it a device which might be used in different situations related to security and personal control. The set contains convenient holder with a belt.

Gold Hunter TM is a type of Hand held metal detector with high sensitivity, also can be used for security check.

It widely used in:

Powering On

Keep Gold Hunter TM away from any metallic objects.

Press 1 second and release the button,you will hear 2 beeps and the LED will light on, indicating power on.

Powering Off

Press and hold the button for a second until you hear a single beep (or single vibration in Silent Mode), indicating power down.

Changing Settings

The Gold Hunter has two sensitivity settings and two detection settings: Audio + Vibrate or Vibrate-only (silent).

Repeatedly press the button to cycle through the settings:

Fast Retune for Mineralized Ground

To tune out the detection of saltwater, wet sand or highly mineralized ground, hold the tip of the Gold Hunter to the water, sand or soil and quick-press the button for an instant Retune.

If necessary, repeat this Fast Retune to further eliminate any environmental response.

Note: An alternate means of eliminating the ground response is to reduce Sensitivity.

Precisely Pinpointing Large Targets

Slowly scan toward the object until the response increases to full/constant alarm. Then quick-press the button to instantly retune and narrow the detection field. Continue scanning toward the object to find its precise location. Repeat this Fast Retune to further narrow detection field as needed.

Auto-Off Feature

After 2 minutes of being ON without a button press, the Gold Hunter will begin warning chirps for 60 seconds, and then will power off automatically.

Scraping Blade

This rugged edge is ideal for sifting through dirt while searching for the target. The Gold Hunter’s 360º-side-scan detection allows the detector to alarm when the blade

is passed in close proximity to a metallic target.

Lanyard Attachment Clip

Use to attach the Gold Hunter TM to your belt, digging pouch or your detector.

Holster

Secure to any standard size belt. A metal snap within the holster will cause the Gold Hunter to alarm if put away while powered on.

Ruler

The Gold Hunter has a ruler molded into its exterior to measure a target’s depth in either centimeters or inches.

Low Battery Alarm

When the battery becomes low, the LED will keep flashing.Replace the 9V battery as soon as possible.

Battery Replacement

Simply rotate the battery cover counterclockwise to remove and clockwise to tighten by hand. To properly install the 9V battery, match the larger battery terminal to the larger opening in the compartment. Remove the battery when the unit is to be stored more than 30 days.

SPECIFICATIONS

Battery: Single 9V (not included)

Warranty: 1 Year Limited Parts/Labor

What's in the box ?

1PCS * GOLD HUNTER TM Waterproof ProPointer

1PCS * User Manual 

1PCS * Woven belt holster

1PCS * Lanyard Attachment Clip

BATTERY NOT INCLUDED