Share on (62034273806):

Light Sources | 6x60w RGBW 4-in-1 led |
Beam Angle | 3-45° |
Power Consumption | 450w |
Warranty | 2years |
Control Modes | DMX512,Master-Slaver,Auto-Run,Sound,Music,RDM |
Display | 180°reversible LCD Display |
Protection Rating | IP20 |
Pan/Tilt | 8/16bit |
DMX Channel | 25/45 Channel |
Dimension | 64*21*40cm |
NW | 16kgs |














There are 6 normal steps for QC control process: | ||||||||
Step 1: all materials passed 100% IQC inspect | ||||||||
Before send materials to workshop and start to produce, our IQC technicians will inspect them.And only the materials are approved to send to workshop if they are qualified. | ||||||||
Step 2: at least 48 hours aging test before packing | ||||||||
All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test | ||||||||
Step 3: hang testing | ||||||||
Each batch production we will select certain percent to do hang or rotating test. | ||||||||
Step 4 : Environment high temperature testing | ||||||||
we did two parts test for high temperature testing : | ||||||||
A: testing during the product still in R & D | ||||||||
B: testing for each batch production | ||||||||
Usually we test the temperature reach to around 45℃. | ||||||||
Step 5 : vibration test--simulating transit environment | ||||||||
each batch production we will select certain percent to test to make sure the goods is safe in transport. | ||||||||
New products from manufacturers at wholesale prices