Name: 1.2m single tube automatic bending machine Model: DSA-ZD-1200 Power supply: 220V (50-60Hz) Temperature: Normal temperature - 300 degrees adjustable Power: 1200W (adjustable) Processing size: 1220MM Bending angle: (30-179 degrees) adjustable Adapt to thickness: within 6MM Other specifications:Optional 1.5M / 1.8M / 2.4M width Scope of application: plexiglass (acrylic) PC PVC PP and other plastic sheet heating bending. Cooling method: Water circulation cooling and air cooling system are arranged to ensure that the workpiece is evenly heated evenly, and it is not easy to be air bubbles. The work surface is configured to dissipate heat for the pure aluminum plate. (When the water temperature is overheated during long-term use) The system is equipped with an automatic water temperature alarm device. At this time, the water source can be replaced again. Configuration features: 1. Advanced button control system, easy to operate, safer and faster. 2. The electronic angle display makes it possible to determine the device more easily and adjust it as needed. 3. Constant temperature energy-saving heating system, the temperature can be adjusted arbitrarily to meet the melting temperature of different plates. 4. High-strength molding device, set time; temperature is automatically formed in an instant. Quality warranty: one year warranty! (Except for consumables and human factors). Configuration and features: 1,Chinese and English button panel operation, automatic / manual two state optional, easy to use, 2,According to the thickness of the board and the heating properties, set the time, angle, and bend automatically. 3,It adopts special quartz tube heating method to heat evenly and prolong the service life.plexiglass bending machine 4,Heating gap can be adjusted according to the thickness of the processed sheet 5,The working voltage can be adjusted freely to ensure the heating requirements of different thickness plates and avoid the phenomenon of paste.plexiglass bending machine 6,Water circulation cooling method, cooling and bending at the same time, pure aluminum work surface design, so that the plate heating is more linear.plexiglass bending machine 7,Built-in temperature control automatic alarm configuration to ensure the safety of equipment. 8,Manually fine-tuning the angle setting (configure the electronic angle digital display) to be more precise and angled, and the configuration is based on the ruler to ensure the uniformity of the batch products. 9,The leakage protection function is safer to use with the grounding wire. 10,Equipment operation process (set the required angle - set the heating time and temperature - automatic bending cooling - bending forming).
