Product Name: Thick material arc double-layer heating bending machine Model: DSA-SD-1200H (Optional 650mm/1.5M/1.8M/2.4M) Power: 4800W (adjustable) Power supply: 220V/50Hz Temperature: normal temperature -350 degrees (adjustable) Processing size: 1220mm Processing thickness: 15mm Bending angle: any angle Foldable arc: suitable for R40mm
flat bending machine flat sheet bending machine Product use: plexiglass (acrylic) PC PP PVC PS board and other plastic materials for heating and bending. Cooling method: Configure the water circulation cooling system (working and cooling at the same time). The pure aluminum work surface dissipates heat faster, ensuring that the plate is evenly heated and not easy to paste. Features: This special hot bending machine, unique double-layer design, one tube on the upper layer, three tubes on the lower layer (can be controlled by one tube or three full-open), especially suitable for material bending under 15mm thick, The plate is heated and softened at the same time, and the heat is said to avoid foaming of the plate. The upper layer can be turned off within 6mm of the plate, and the single layer can be heated, and the design is humanized. The lower heating gap (0-100mm) is adjustable, and the maximum heating area is 70mm. The larger the heating area is, the larger the bending curvature is. The heating time can be determined according to the thickness of the plate. The voltage is used to control the heating temperature, which is convenient and practical. If you need to bend the angle, you can turn off the other two heating tubes. You only need a single heating tube to work. Note: After the standby device is completely cooled after use, close the gap of the heating tube, otherwise the machine panel will be easy to loose! Warranty period: The whole machine is guaranteed for one year (except for damaged parts and human factors)
