Share on:
This machine consists of pnuematic control system , heating/cooling system, tilting system,rotor,thermal resistance,main driving system,mixing chamber,rotor ,dust stop device , ete . It is used to plasticize , mix and final mix rubber , plastics or blend of plastics and rubber
2.Tilting mechanism consists of brake motor , cycloidal gear reducer , TP type worm and worm gear etc . It is able to actuate the mixing chamber to tilte by 140 around the front rotor
3.rotor shaft wing body top and wing corner are welded up with wear resistant alloy . rotor shaft surface ,the mixing chamber inner wall , upper ram surface and other surface connected with stock are hardened or polished and plated with hard chrome , or welded up wear resistant alloy welding , so they are wear resistant and corrosion resistant
4.rotor shaft is of integral structure rotor wing body welded on bored shaft , so it improves the strength and stiffness of the rotor . rotor inner wing vody cavity can be put through the cooling water or heating steam
5..mixing chamber is jacket type hollow structure . upper ram is hollow to increase cooling or heating area and the temperature control effect
6.main driving system consists of main motor ,reducer ,connecting gearbox odd-speed and face to face rotation of rotors is achived
7.electrical control system adopts the imported PLC device . All electronic components are imported or introduction technology products , to improve the reliability of the system.
Model | X(S)N-1.5*4 | X(S)N-3*8 | X(S)N-5*11 | X(S)N-10*15 |
total volume of mixing chamber | 4L | 8L | 11L | 15L |
working volume of mixing chamber | 1.5 | 3L | 5L | 10L |
Main motor power | 4 kw | 7.5 kw | 7.5kw | 15 kw |
Tilting motor power | 0.55 kw | 0.55kw | 0.75kw | 1.1 kw |
Tilting angel | 135 | 140 | 140 | 140 |
rotor rotated speed (front/rear) | 32/24.5r/min | 32/23.5r/min | 32/23.5r/min | 32/23.5r/min |
pressure of compressed air | 0.6-0.8Mpa | 0.6-0.8Mpa | 0.6-0.8Mpa | 0.6-0.8Mpa |
flow of compression air | ≧0.2m3/h | ≧0.3m3/h | ≧0.4m3/h | ≧0.5m3/h |
cooling water pressure | 0.3-0.4Mpa | 0.3-0.4Mpa | 0.3-0.4Mpa | 0.3-0.4Mpa |
cooling water consumption | 0.5-1m3/h | 1-2m3/h | 2-3m3/h | 4-7m3/h |
machine weight | about 1500 kg | about 2000 kg | about 2300kg | about 3300kg |
Model | X(S)N-35*75 | X(S)N-55*125 | X(S)N-75*180 | X(S)N-110*250 |
total volume of mixing chamber | 75 | 125 | 180L | 250L |
working volume of mixing chamber | 35 | 55 | 75L | 110 |
Main motor power | 55 | 75 | 110kw | 185 |
Tilting motor power | 2.2kw | 3kw | 4kw | 5.5kw |
rotor rotated speed (front/rear) | 30/24.5r/min | 30/24.5r/min | 30/24.5r/min | 30/24.5r/min |
pressure of compressed air | 0.6-0.8Mpa | 0.6-0.8Mpa | 0.6-0.8Mpa | 0.6-0.8Mpa |
flow of compression air | ≧0.8m3/h | ≧0.9m3/h | ≧1.0m3/h | ≧1.5m3/h |
cooling water pressure | 0.4-0.5Mpa | 0.4-0.5Mpa | 0.5-0.6Mpa | 0.5-0.6Mpa |
cooling water consumption | 8-12m3/h | 10-15m3/h | 12-18m3/h | 15-20m3/h |
machine weight | about 6500 kg | about 7500 kg | about 10300 kg | about 15000 kg |
1.we will one year guarantee for the machine . During this period if there is anything wrong with machine , supplier are responsible for it and should offer the best spare part freely for buyer
2.supplier should send professional if required by customer
3.we will offer service for whole life of machine